+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: For Sale (https://www.306oc.co.uk/forum/forumdisplay.php?fid=26)
+--- Forum: Parts (https://www.306oc.co.uk/forum/forumdisplay.php?fid=25)
+--- Thread: Breaking VLR 306 GTi6 (/showthread.php?tid=25372)
Breaking VLR 306 GTi6 - eddy_gti6 - 19-07-2014
If I can get enough interest in parts I will break the 306.
Looking to sell my VLR 306 GTi6
Oct 2014
Tax - Sep 2014
Mileage - 118k+ use the car day to day
Engine was rebuilt around 1000 mile ago on 5th April as you can see on my project thread. New head gasket, head bolts, water pump, cam belt kit, exhaust gasket. New inlet gasket was fitted about a month ago when the VLR was fitted.
spec:
Bare engine with catcam 3107s, XSI engine mount everything removed from aux setup so only runs an alternator done 3000 mile since head gasket, timing belt and water pump were replaced. I have an inlet with no TB I will include as well - £350
Maniflow manifold with Magnex group N exhaust - £250
VLR BTCC inlet manifold with throttle body and cold air feed and modified slam panel - SOLD
Omex 600 ecu with custom loom - SOLD
Billet Lightened & balanced Flywheel - £160
Alloy crank pulley - £50
BakerBM group N engine mounts with group A fork bush - £75
GE short shift - £15
Mocal 13row oil cooler - £80
Pugsport alloy gear linkages - £40
Gaz GHA coilovers with spoox adjustable top mounts (needs new bearings in top mounys what are £20 from spoox) - £250
Pugsport solid axle mounts - £100
Bilstein B4 rear shocks - £40
Pro race 1.2s - SOLD
288mm brembos with braided lines - £200
Rallye blanks - SOLD
Carbon coilpack cover - £70
AEM Wideband - £100
Oil pressure Gauge & volt gauge with carbon cd blank- £35
205 gti cooling system with 106 diesel header tank - £100
106 electric power steering with pipes - £50
Grey masked headlights - £50
plenty more to add...
![[Image: 20140615_204956_zpsgkcrwlso.jpg]](http://s1259.photobucket.com/user/eddy-gti6/media/20140615_204956_zpsgkcrwlso.jpg.html)
![[Image: 20140615_205203_zpsb8sgfesb.jpg]](http://s1259.photobucket.com/user/eddy-gti6/media/20140615_205203_zpsb8sgfesb.jpg.html)
![[Image: 20140615_205325_zpshk9hrgmx.jpg]](http://s1259.photobucket.com/user/eddy-gti6/media/20140615_205325_zpshk9hrgmx.jpg.html)
![[Image: 20140606_140142_zpsdhx14f32.jpg]](http://s1259.photobucket.com/user/eddy-gti6/media/20140606_140142_zpsdhx14f32.jpg.html)
![[Image: 20140607_121601_zpstzrpjanc.jpg]](http://s1259.photobucket.com/user/eddy-gti6/media/20140607_121601_zpstzrpjanc.jpg.html)
RE: Breaking VLR 306 GTi6 - Josh_Quant - 19-07-2014
Interested in rear shocks
RE: Breaking VLR 306 GTi6 - Piggy - 19-07-2014
maybe interested in the 106 PAS setup
RE: Breaking VLR 306 GTi6 - Dum-Dum - 20-07-2014
potentially interested in engine mounts and crank pulley.
Wish I had money for so much more.
RE: Breaking VLR 306 GTi6 - ash23 - 20-07-2014
Probably a silly question but do the brembos fit under lasers?
RE: Breaking VLR 306 GTi6 - Eeyore - 20-07-2014
Need 16s as a minimum for brembos
RE: Breaking VLR 306 GTi6 - eddy_gti6 - 20-07-2014
Not sure if brembos will fit under lasers, probably not without spacers but im running them under 15" pro 1.2s
RE: Breaking VLR 306 GTi6 - Dum-Dum - 20-07-2014
The brembos need 20mm spacers to go under cyclones IIRC
RE: Breaking VLR 306 GTi6 - zx_volcane - 20-07-2014
oil cooler plate thermostatic?
RE: Breaking VLR 306 GTi6 - eddy_gti6 - 20-07-2014
Yes mate thermostat sandwich plate and 13 row cooler
RE: Breaking VLR 306 GTi6 - zx_volcane - 20-07-2014
(20-07-2014, 10:34 PM)eddy_gti6 Wrote: Yes mate thermostat sandwich plate and 13 row cooler
perfetct - deffo interested in this then if you decide to break
RE: Breaking VLR 306 GTi6 - eddy_gti6 - 20-07-2014
Yes mate the car is now being broke
RE: Breaking VLR 306 GTi6 - sherman306 - 22-07-2014
How much posted for the flywheel and crank pulley mate?
RE: Breaking VLR 306 GTi6 - eddy_gti6 - 22-07-2014
Both sold sorry
RE: Breaking VLR 306 GTi6 - sherman306 - 22-07-2014
Dammit haha