+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: 306 Repairs & Mods (https://www.306oc.co.uk/forum/forumdisplay.php?fid=22)
+--- Forum: Suspension, Transmission, Handling & Braking (https://www.306oc.co.uk/forum/forumdisplay.php?fid=19)
+--- Thread: Powerflex 306 Front wishbone kit (/showthread.php?tid=24954)
Pages:
1
2
RE: Powerflex 306 Front wishbone kit - Piggy - 05-07-2014
Get a pic up of the type you have...
RE: Powerflex 306 Front wishbone kit - LewisG - 05-07-2014
(05-07-2014, 05:53 PM)Piggy Wrote: Get a pic up of the type you have...
The one that isnt fitted yet is in the car, but Ive found this pic which is the exact same
![[Image: mhsCM0OXdyheO2oY9AcF7pw_zps39a57950.jpg]](http://s889.photobucket.com/user/lewisgilliatt/media/mhsCM0OXdyheO2oY9AcF7pw_zps39a57950.jpg.html)
RE: Powerflex 306 Front wishbone kit - Piggy - 05-07-2014
Yeah thats the new design
Cant understand why you're struggling?! That new design is almost 10mm shorter and narrower internal than the old one.
Slips straight in!!??
Take some measurements of the bushes
RE: Powerflex 306 Front wishbone kit - LewisG - 05-07-2014
(05-07-2014, 05:59 PM)Piggy Wrote: Yeah thats the new design
Cant understand why you're struggling?! That new design is almost 10mm shorter and narrower internal than the old one.
Slips straight in!!??
Take some measurements of the bushes
I will in the morning, I had to take the washer out and cut abit off for it to fit. Its demolished, Ill have to either get some other bushes or maybe powerflex can help me out.
RE: Powerflex 306 Front wishbone kit - Piggy - 05-07-2014
Why did you cut a bit off where the washer is!?
RE: Powerflex 306 Front wishbone kit - LewisG - 06-07-2014
Ive just suddenly realised, you know the metal cyclinder that goes inside, in the picture it sits exactly flush with the bush, but on mine, the bush was over lapping the metal cyclinder, so maybe ive got a dodgy set that was made longer or something?
RE: Powerflex 306 Front wishbone kit - Piggy - 06-07-2014
Yeah maybe you got the old pin but new bush
RE: Powerflex 306 Front wishbone kit - thiscocks - 07-07-2014
Mine seem to be the new type with the metal pin moulded in. Not tried fitting yet.
P.S. anyone know the std front arb size of the zx16v? Assume it will be the same as the 306gti