309 wing mirror interior cover - Printable Version +- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum) +-- Forum: For Sale (https://www.306oc.co.uk/forum/forumdisplay.php?fid=26) +--- Forum: Misc & Wanted (https://www.306oc.co.uk/forum/forumdisplay.php?fid=14) +--- Thread: 309 wing mirror interior cover (/showthread.php?tid=24907) |
309 wing mirror interior cover - LewisG306 - 28-06-2014 Just seeing from pure luck if anyone has got a interior black cover for passenger wing mirror for a 309 cheers RE: 309 wing mirror interior cover - Eeyore - 28-06-2014 Will be very hard pushed on here. I advise eBay or 309 owners. RE: 309 wing mirror interior cover - welshpug - 28-06-2014 with or without hole for adjuster? RE: 309 wing mirror interior cover - Danny2009 - 28-06-2014 With. RE: 309 wing mirror interior cover - Dangti6 - 28-06-2014 I'll possibly have one but the prongs will undoubtably be snapped. RE: 309 wing mirror interior cover - LewisG306 - 28-06-2014 Checked eBay and 309 owners page is shocking , they haven't even accepted my registration :-( and yeah that's what has happened to this one.. Not impressed with the French for this design of pushing it on... Stupid idea... Cheers though lads RE: 309 wing mirror interior cover - Danny2009 - 28-06-2014 I tried gluing it mate didn't work right well like Lol RE: 309 wing mirror interior cover - welshpug - 28-06-2014 design is fiiine as long as you dont remove them :p RE: 309 wing mirror interior cover - Dangti6 - 28-06-2014 I used clear silicone to hold mine on. Solid as a rock RE: 309 wing mirror interior cover - LewisG306 - 28-06-2014 Clear silicone eyyy? You just run it round the edges of the inside of it and just hold it in? Lol , this may have to be done , finding one of these covers is proving to be near impossible And yeah Danny , think I might have to do domething like that :-( *something RE: 309 wing mirror interior cover - Danny2009 - 28-06-2014 Get a bit of other seal on it RE: 309 wing mirror interior cover - Dangti6 - 28-06-2014 Yeah I just used it as an adhesive. I have a roll cage so I shut a sponge between the mirror cover and the A pillar and it held it in situ until dry RE: 309 wing mirror interior cover - LewisG306 - 28-06-2014 Lucky for those with roll cages...;-) , looks like I'll have to sit there and hold it til it dries lmao |