Stub axle?? - Printable Version +- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum) +-- Forum: 306 Repairs & Mods (https://www.306oc.co.uk/forum/forumdisplay.php?fid=22) +--- Forum: Suspension, Transmission, Handling & Braking (https://www.306oc.co.uk/forum/forumdisplay.php?fid=19) +--- Thread: Stub axle?? (/showthread.php?tid=2466) |
Stub axle?? - Will_306_hdi - 27-03-2012 Hi all. The o/s/r road wheel has more negative chamber than the n/s. Ive look on ebay for complete rear axles but someone said at work That its more likely to be a stub axle as 306s are apparantly prone for this Issue. Can anyone shed some info as what to change first. Many thanks. Re: Stub axle?? - Connor - 28-03-2012 Don't listen to that person in work... Its most likely the trailing arm bearings, one of the common faults on a 306 and a replacement beam will be your best bet Stub axle?? - Matt - 28-03-2012 Replacement beam or a beam rebuild Connor is right it will be the trailing arm bearings at fault Re: Stub axle?? - mark_airey - 28-03-2012 if the bearings have been buggered for a while it will have trashed the stub axle as well, the bearings are the thing that fail, but people don't check/notice the problem which then ends up ruining the stub axle too! Easiest option is to replace the beam for a known good one or rebuild one using new parts Re: Stub axle?? - Will_306_hdi - 28-03-2012 I did wander about the rear axle. Ive never known a 306 with a bent stub axle. Ill try and source an axle or buy the repaair kit off ebay. Re: Stub axle?? - Will_306_hdi - 01-04-2012 Will it say how to change the radius arm bearings in a haynes manual?. I cant afford to buy a new axle so will rebuild my original one. Re: Stub axle?? - Connor - 01-04-2012 You don't need to buy a new one, just a decent second hand one which is ok, then you can take your time to rebuild your current axle. Then swap it back on and sell the second hand one back on Re: Stub axle?? - Will_306_hdi - 01-04-2012 How much should i pay?. Money is abit tight this month. Will it say in a haynes manual how to do the bearing Re: Stub axle?? - gareth7 - 02-04-2012 Have a read of this guide mate, it explains everything http://www.205gtidrivers.com/articles.p ... beamrefurb Re: Stub axle?? - Will_306_hdi - 02-04-2012 That guide is brilliant. Thankyou very much. Re: Stub axle?? - gareth7 - 02-04-2012 No problem mate, I found it useful too.....if Carlsberg did beam refurb guides this would probably be it Re: Stub axle?? - Will_306_hdi - 03-04-2012 gareth7 Wrote:No problem mate, I found it useful too.....if Carlsberg did beam refurb guides this would probably be it too right |