Hi all - Printable Version +- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum) +-- Forum: General (https://www.306oc.co.uk/forum/forumdisplay.php?fid=6) +--- Forum: Newbies (https://www.306oc.co.uk/forum/forumdisplay.php?fid=24) +--- Thread: Hi all (/showthread.php?tid=24171) |
Hi all - 205steve - 21-05-2014 Hello...... Ive just realised ive not introduced myself yet, sorry! Hi, im steve Ive been remapping at various levels for around 12-13 years. Im an electrician by trade, but have lots of other skills including welding, machining, diagnostics, inverter programming ect. I have experiance in immo removal, egr and dpf removal, and standalone systems like MBE. Also i have worked on vehicles ranging from a 480bhp mini to my own 300tdi landrover which uses a manual bosch pump (which i also tune) My hobbies include Diving, i have a rotax max formula k chassied kart, and also offroading when the time allows. My current project is a Pug 205 gti road legal track car to which im fitting a xud lump to which im obviously going to tune, including a fmic, 1mm pump conversion and a garrett gt17 turbo, which hopefully will see me get around 170bhp, for starters I then aim to look at the vnt turbo option with a standalone controller to push the 200bhp mark (fingers crossed) I am more than happy to help where i can, and will answer any questions with honest, straight forward answers See you all in the forum!! RE: Hi all - 7057sam - 21-05-2014 Hi steve Car sounds epic get a project thread up RE: Hi all - Mattcheese31 - 21-05-2014 welcome to the club fella . . .plans sound good . . RE: Hi all - mcvite - 21-05-2014 Welcome to the forum RE: Hi all - 205steve - 22-05-2014 I've started a build thread but it's in the xud section I should move it really to the projects bit RE: Hi all - mr_fish - 22-05-2014 welcome! I've seen your project and the plans you have. Looks good One of the mods will see it and move it to the correct section I should think. RE: Hi all - 205steve - 22-05-2014 That would be great if they could please, sorry my mistake |