+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: 306 Repairs & Mods (https://www.306oc.co.uk/forum/forumdisplay.php?fid=22)
+--- Forum: Interior, Exterior, ICE (https://www.306oc.co.uk/forum/forumdisplay.php?fid=12)
+--- Thread: Quick question about cyclone wheel bolts (/showthread.php?tid=23803)
Quick question about cyclone wheel bolts - titch - 05-05-2014
Are there specific bolts for cyclone alloys ? Or will the ones from my lasers be ok ?
Cheers Titch
RE: Quick question about cyclone wheel bolts - Mattcheese31 - 05-05-2014
they will be fine, heads might be longer though if they're proper laser bolts, safe though . .
RE: Quick question about cyclone wheel bolts - Eeyore - 05-05-2014
flat bolts.
RE: Quick question about cyclone wheel bolts - Matt - 05-05-2014
Flat bolts as said, laser one will poke out lol, I've just this second put up a for sale thread for bolts
RE: Quick question about cyclone wheel bolts - Grant - 05-05-2014
Just be wary, there are two different types of cyclones. I have a set in my garden with tapered bolt holes, and a set on my car with flat seating..
Just to be diverse yeah? lol
RE: Quick question about cyclone wheel bolts - Mattcheese31 - 05-05-2014
(05-05-2014, 06:09 PM)Grant Wrote: Just be wary, there are two different types of cyclones. I have a set in my garden with tapered bolt holes, and a set on my car with flat seating..
Just to be diverse yeah? lol
surely both types will take a flat seated bolt though yeah? . . . . . i've had cyclones where idiots have used tapered bolts and worn the hole through, sure it's not that? lol . . .
RE: Quick question about cyclone wheel bolts - Grant - 05-05-2014
Ive seen a few sets like it TBH. I remember reading somewhere on the '6 forum that there were some 'early' cyclones with alternative seating patterns.
f*cking peugeot
RE: Quick question about cyclone wheel bolts - titch - 05-05-2014
Ok now that has confused me a bit, these are the cyclones i have. Picked them up on Saturday for 30 quid, excuse the state of them as they need a refurb and i have started to rub them down.
![[Image: IMAG1096_zpsbda317f4.jpg]](http://s242.photobucket.com/user/pipeboy/media/IMAG1096_zpsbda317f4.jpg.html)
![[Image: IMAG1097_zps5dcdac44.jpg]](http://s242.photobucket.com/user/pipeboy/media/IMAG1097_zps5dcdac44.jpg.html)
Cheers Titch
RE: Quick question about cyclone wheel bolts - Pompey306mark - 05-05-2014
Flat seat
RE: Quick question about cyclone wheel bolts - Toms306 - 06-05-2014
The set I had for 4 years on and off had one flat seat and 3 part tapered with same bolts... It's to do with the spare wheel. Old spares needed a taper, but also a flat for the alloys. Newer ones have spare steels which take flat bolts.
RE: Quick question about cyclone wheel bolts - miles - 06-05-2014
Yes 2 types, those in the pic's are the normal pattern which was used until around 1999, after that the bolts still flat faced had a shank on them to help locate the wheel at a guess
RE: Quick question about cyclone wheel bolts - cully - 06-05-2014
tapered shank on the shouldered bolt holds the std steal spare wheel
