+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: 306 Repairs & Mods (https://www.306oc.co.uk/forum/forumdisplay.php?fid=22)
+--- Forum: Suspension, Transmission, Handling & Braking (https://www.306oc.co.uk/forum/forumdisplay.php?fid=19)
+--- Thread: standard alloy wheel bolt lengths... (/showthread.php?tid=23087)
standard alloy wheel bolt lengths... - Piggy - 10-04-2014
Would be interested to know the folllowing:
How long from washer to tip is the standard 306 alloy flat seated wheel bolt? (Shank length) I am led to believe it is 45mm?
How many MM protrude after going through a standard 306 alloy, IE a clone?
Thanks
RE: standard alloy wheel bolt lengths... - Mattcheese31 - 10-04-2014
get tape measure out? . . .:p
RE: standard alloy wheel bolt lengths... - welshpug - 10-04-2014
35mm.
as for how much pokes out, no idea.
enough :p
Re: standard alloy wheel bolt lengths... - kentiiboii - 10-04-2014
Guessing 10mm sticking out?
RE: standard alloy wheel bolt lengths... - Piggy - 10-04-2014
Ive found standard second hand sets that are 45mm?
I would measure...but I have neither standard bolts or alloys to go measure!!
RE: standard alloy wheel bolt lengths... - Piggy - 11-04-2014
(10-04-2014, 05:41 PM)welshpug Wrote: 35mm.
as for how much pokes out, no idea.
enough :p
You sure its 35mm?
RE: standard alloy wheel bolt lengths... - welshpug - 11-04-2014
actually I was slightly out by 3mm, I thought they were the same as the 205 but they're marginally longer.
9605 87
16
ALUMINUM WHEEL SCREW
12X125-38
FOR WHEEL 5,5 J14
16
12X125-38
- INJECTION XU10J4RS
FOR WHEEL 6 J15
16
12X125-38
- ROLAND GARROS
FOR WHEEL 6 J15
RE: standard alloy wheel bolt lengths... - Piggy - 11-04-2014
So the 45mm ones I have found must be from something else.
Hmm.
RE: standard alloy wheel bolt lengths... - welshpug - 11-04-2014
quite likely, stick a picture up.
RE: standard alloy wheel bolt lengths... - C.A.R. - 13-04-2014
Thinking of running spacers then? I had his same issue when I was considering a set of 10mm spacers for the back of mine, couldn't find the information anywhere and too much of a lazy shit to go and measure one
