306 1.9 dturbo supercharged - Printable Version +- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum) +-- Forum: General (https://www.306oc.co.uk/forum/forumdisplay.php?fid=6) +--- Forum: Newbies (https://www.306oc.co.uk/forum/forumdisplay.php?fid=24) +--- Thread: 306 1.9 dturbo supercharged (/showthread.php?tid=22499) |
306 1.9 dturbo supercharged - ryanv222 - 24-03-2014 hi, i new to here probably posting this in the totally wrong place but hey! im looking to supercharge my Dturbo and was wondering what superchager to run and a few pointers... at the moment my set up is fairly common... it a TD04L with 9mm pump with gov, and exantia inlet ect... anyway would really like some help! Also! i can only achive 20psi boost fromy my turbo.. i have no boostleaks as i have pressure tested the hole system i am running max fuel and low idle too, and if i turn the fuel up anymore the idle goes crazy! bloody cars! heres a few more pics to! RE: 306 1.9 dturbo supercharged - Piggy - 24-03-2014 I would say to leave the turbo on there and scharge it, thus being a compound setup. Likely to want to remove PAS pump or relocate to make room There is someone else on here with a scharged setup...have a look in projects section RE: 306 1.9 dturbo supercharged - Niall - 24-03-2014 Darren ran a eaton M45 very successfully and has now sold the setup to London Dan. Worth a look at both of their project threads. RE: 306 1.9 dturbo supercharged - tomosy10 - 24-03-2014 Hi and welcome not sure On how to super charge but car looks smart. RE: 306 1.9 dturbo supercharged - ryanv222 - 24-03-2014 thanks for all the feed back ive updated the post a little will go into more detail on a build thread! and yes piggy i was going to leave the turbo on it aswell, how would you fabricate the supercharger, would be ideal if someone posts a link of a thread! cheers RE: 306 1.9 dturbo supercharged - Niall - 24-03-2014 Although it's on a petrol, you can have a look at my build thread to see how I mounted my charger http://306oc.co.uk/forum/thread-3684-page-21.html RE: 306 1.9 dturbo supercharged - mcvite - 24-03-2014 Welcome to the forum RE: 306 1.9 dturbo supercharged - Eeyore - 24-03-2014 Welcome to the forum and good luck with the project. As Niall said Darren ran a super charger and it went well. RE: 306 1.9 dturbo supercharged - 7057sam - 24-03-2014 Welcome to the forum RE: 306 1.9 dturbo supercharged - DazzaHDI - 24-03-2014 Welcome mate! Car looks sweet and I hope you ate that civic Yeah as said have a look around the forum and good luck with supercharging RE: 306 1.9 dturbo supercharged - SupaStar88 - 25-03-2014 Hmm that would be a little beast if upgrading turbo aswell RE: 306 1.9 dturbo supercharged - Herby7 - 25-03-2014 Welcome RE: 306 1.9 dturbo supercharged - ryanv222 - 28-03-2014 What turbo shall i upgrade my turbo to lads!? RE: 306 1.9 dturbo supercharged - Midnightclub - 28-03-2014 A bigger one RE: 306 1.9 dturbo supercharged - ryanv222 - 28-03-2014 as in what modle? RE: 306 1.9 dturbo supercharged - Midnightclub - 28-03-2014 There's literally TONNES of information on here, have a look through the projects section, guides etc.. and it will give you a good idea. RE: 306 1.9 dturbo supercharged - ryanv222 - 07-04-2014 sorry about not updating it on here! been busy! will post all the pictures up soon, is it a good idea to run a td05 with a supercharger? RE: 306 1.9 dturbo supercharged - Piggy - 07-04-2014 I echo the words of Midnightclub...do some reading up. Gather info and knowledge first. You need to be wise about turbos/superchargers before just strapping one on, and to be wise is the correct application of knowledge. RE: 306 1.9 dturbo supercharged - Matt - 07-04-2014 love the look of this car, get more pictures up RE: 306 1.9 dturbo supercharged - darrenjlobb - 07-04-2014 My XUD with a blower: And my DW10 with a a few additional blowers: Have a look through my project threads and you will see lots of info on how i went about it RE: 306 1.9 dturbo supercharged - ryanv222 - 07-04-2014 (07-04-2014, 01:05 PM)darrenjlobb Wrote: My XUD with a blower: Okay will do, i have a Eaton M45 supercharger here ready, and am currently rebuilding a stronger engine... but after stripping the XUD head i discovered the head was cracked... i believe you are not very far from me! dont suppose you have any heads lying around? would be very helpful! RE: 306 1.9 dturbo supercharged - darrenjlobb - 07-04-2014 Where are you based? Got a few compete motors RE: 306 1.9 dturbo supercharged - ryanv222 - 07-04-2014 (07-04-2014, 07:37 PM)darrenjlobb Wrote: Where are you based? Got a few compete motors only in camborne mate, & that would be good |