![]() |
Cutting out problem - Printable Version +- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum) +-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16) +--- Forum: DW10 HDi section (https://www.306oc.co.uk/forum/forumdisplay.php?fid=10) +--- Thread: Cutting out problem (/showthread.php?tid=22384) |
Cutting out problem - iigodiix - 20-03-2014 I've come across this problem that when I get to about quarter of a tank it either cuts out and I can't start it for a few seconds, or my engine light comes on and I get the codes... Po220 Throttle position sensor. Po380 glow pug Po230 fuel pump primary. [attachment=14459] [attachment=14460] [attachment=14461] I'm slightly confused on why it seems to do this? Any ideas? Cheers Re: Cutting out problem - kentiiboii - 20-03-2014 Its something to do with your fuel pumo mate. Someone will be here to say exactly what. The RE: Cutting out problem - iigodiix - 20-03-2014 (20-03-2014, 11:08 PM)kentiiboii Wrote: Its something to do with your fuel pumo mate. Someone will be here to say exactly what. The A pal mentioned that maybe my filter needs cleaning? Maybe the bottom half is just a bit more filthy than it should be RE: Cutting out problem - Poodle - 21-03-2014 It's could be worth letting her run down on fuel then cleaning out the gunk in the tank and strainer if it's never been done. Are you an "enthusiastic" driver? ![]() RE: Cutting out problem - iigodiix - 21-03-2014 (21-03-2014, 06:41 AM)Poodle Wrote: It's could be worth letting her run down on fuel then cleaning out the gunk in the tank and strainer if it's never been done. Wow someone is up early! And yes I kinda of am, well I like to show up a few people, their face when they see a 5door hatch sooting past them :p Ahh thanks anyways! Might give it a clean on the weekend! RE: Cutting out problem - mspdan - 21-03-2014 i had exactly same problem mate, turns out the filters in my car needed cleaning/ changing. That being lift pump and fuel filter. although my lift pump didnt last much longer after this started to be fair, wouldnt run below a quarter of a tank, id be checking your filters and also how much gold flakes are in the bottom of the fuel filter housing thanks RE: Cutting out problem - pro_steve - 21-03-2014 Check the wire mesh filter in the lift pump in the tank, after that clean the fuel pressure regulator. RE: Cutting out problem - iigodiix - 21-03-2014 (21-03-2014, 05:58 PM)pro_steve Wrote: Check the wire mesh filter in the lift pump in the tank, after that clean the fuel pressure regulator. Thanks guys I will check this out, on my list of things to do! RE: Cutting out problem - mspdan - 22-03-2014 how did you get on mate? |