+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16)
+--- Forum: XU Petrol Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=17)
+--- Thread: drive shaft removal (/showthread.php?tid=21689)
drive shaft removal - cully - 25-02-2014
want to remove the O/side drive shaft to replace the rear engine mount for a vibratec bushed mount
how much oil am i going to loose from the GTI6's gearbox ?
i plan on replacing the diff seal too
if i jack it up one sided will i get away without loosing any?
drive shaft removal - td_dan - 25-02-2014
Yes jack it up 1 side and very little will be lost iv done it a few times
RE: drive shaft removal - Piggy - 25-02-2014
Needs to be jacked up quite high...
Why not just drain ans refill?
RE: drive shaft removal - cully - 25-02-2014
cause its got new oil in it from when the clutch was done
may just catch what comes out and put it back in the top
RE: drive shaft removal - Davo - 25-02-2014
The drain stud is on the bottom so just drain it out and refill it back in the breather on top when you have the shaft back in.
RE: drive shaft removal - Piggy - 25-02-2014
(25-02-2014, 12:56 PM)cully Wrote: cause its got new oil in it from when the clutch was done
may just catch what comes out and put it back in the top
Thats what I meant