+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: 306 Repairs & Mods (https://www.306oc.co.uk/forum/forumdisplay.php?fid=22)
+--- Forum: Suspension, Transmission, Handling & Braking (https://www.306oc.co.uk/forum/forumdisplay.php?fid=19)
+--- Thread: Adaptor wheels spacers? peugeot > ford fitment? (/showthread.php?tid=21537)
Adaptor wheels spacers? peugeot > ford fitment? - Matt-Rallye - 20-02-2014
Hi all
Basically i have purchased some team dynamics in ford fitment (i know i dont own a ford but they were cheap
)So my question is wheres the best place too get hubcentric adaptor spacers to bolt ford wheels too my peugeot? much be 20mm spacers to correct the offset.
Matt
RE: Adaptor wheels spacers? peugeot > ford fitment? - aggyj17 - 20-02-2014
Have you tried ebay? Even if they dont sell them off the shelf I bet if you messaged them someone would make them for you.
RE: Adaptor wheels spacers? peugeot > ford fitment? - Matt-Rallye - 20-02-2014
i did have a quick look but the only set i could see were £130 + p&p which seemed abit steep to me.
RE: Adaptor wheels spacers? peugeot > ford fitment? - Danny2009 - 20-02-2014
20mm hubcentric spacers arnt cheap mate unless you drop on a second hand set
RE: Adaptor wheels spacers? peugeot > ford fitment? - Matt-Rallye - 20-02-2014
I know, i could just wang on some bored out ford hubcentric spacers but i believe in doing a job properly or not bothering at all
Adaptor wheels spacers? peugeot > ford fitment? - zx_volcane - 20-02-2014
I've got a set for sale
RE: Adaptor wheels spacers? peugeot > ford fitment? - Matt-Rallye - 20-02-2014
You have a PM sir
RE: Adaptor wheels spacers? peugeot > ford fitment? - Kezzieboy - 20-02-2014
Probably easiest to buy either ford or pug ones and get the side that needs changing machined? And oi, Tom, I thought we were swapping
RE: Adaptor wheels spacers? peugeot > ford fitment? - Matt-Rallye - 21-02-2014
Yeah i think thats the route im being forced down in all honesty. if i dont purchase some from zx-volcane then i can machine some myself at work
RE: Adaptor wheels spacers? peugeot > ford fitment? - C.A.R. - 21-02-2014
My 26mm (!) O.Z. Spacers were for Ford > Pug fitment, and they set me back around £120 from Italy...
RE: Adaptor wheels spacers? peugeot > ford fitment? - Matt-Rallye - 21-02-2014
Unfortunately im a pikey and i refuse to pay that much for some drilled bitsof measured aluminium
RE: Adaptor wheels spacers? peugeot > ford fitment? - gavxud - 21-02-2014
65 quid for four on ebay with extended bolts
RE: Adaptor wheels spacers? peugeot > ford fitment? - 7057sam - 28-02-2014
I ran spacers and longer bolts on track completey fine just need a flathead to get the spacers off after the sessions
I think have some bolts and spacers kicking around or are you already sorted?
RE: Adaptor wheels spacers? peugeot > ford fitment? - Grant - 28-02-2014
(21-02-2014, 11:10 AM)gavxud Wrote: 65 quid for four on ebay with extended bolts
You would do better to get the hub-centric ones. They keep the stress more where it should be, so you don't chew through wheel bearings.
RE: Adaptor wheels spacers? peugeot > ford fitment? - Matt-Rallye - 28-02-2014
(28-02-2014, 12:21 PM)7057sam Wrote: I ran spacers and longer bolts on track completey fine just need a flathead to get the spacers off after the sessions
I think have some bolts and spacers kicking around or are you already sorted?
I have been offered some by another member but pm me your cheapest price
(28-02-2014, 12:23 PM)Grant Wrote:(21-02-2014, 11:10 AM)gavxud Wrote: 65 quid for four on ebay with extended bolts
You would do better to get the hub-centric ones. They keep the stress more where it should be, so you don't chew through wheel bearings.
^ precisely this!