oil leak at vacuum pump end - Printable Version +- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum) +-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16) +--- Forum: XUD Section (https://www.306oc.co.uk/forum/forumdisplay.php?fid=11) +--- Thread: oil leak at vacuum pump end (/showthread.php?tid=21494)

oil leak at vacuum pump end - Teddy - 18-02-2014 got a very slight oil leak on vacuum end off the head swaped the seal still leaking the odd drip is there a seal on camshaft on that end ? cheers RE: oil leak at vacuum pump end - Niall - 18-02-2014 Have you got a pic of the pump? if they are the same design as the GTi ones, i always found keeping a new seal on there and running a bead of sealant around the outer edge of the pump where it meets the face of the head works. RE: oil leak at vacuum pump end - Teddy - 18-02-2014 same as that pal RE: oil leak at vacuum pump end - c.gerrard - 18-02-2014 That'll be your 'o' ring then. Tried a new one or some intant gasket? RE: oil leak at vacuum pump end - mr_fish - 19-02-2014 Theres two o rings I had to fit a vacuum pump to the xantia engine when I fitted it, just used 2 new seals and seemed to be fine. RE: oil leak at vacuum pump end - Teddy - 19-02-2014 cheers lads will have a look RE: oil leak at vacuum pump end - anto - 19-02-2014 Pain in the arse ive had a few new seals on it and some gasket sealant and it still leaks. Ive given up to be honest.