+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: For Sale (https://www.306oc.co.uk/forum/forumdisplay.php?fid=26)
+--- Forum: Misc & Wanted (https://www.306oc.co.uk/forum/forumdisplay.php?fid=14)
+--- Thread: Wanted: Urgently needed, hdi inlet elbow studs (/showthread.php?tid=21465)
Urgently needed, hdi inlet elbow studs - ozonehostile - 17-02-2014
Replacing the leaking inlet elbow gasket on my hdi on the weekend, managed to snap the Bastard stud so can't get a nut on the one to tighten the elbow to the inlet manifold, que chronic boost leak
Anyone breaking an hdi engine or happen to have a spare inlet manifold lying about that I can have the studs out of?
There the two that hold the elbow to the inlet manifold with two 13mm nuts.
Urgently needed as the car sounds like a bloody kettle and drinking fuel like a '6 :-(
RE: Urgently needed, hdi inlet elbow studs - Chris_90 - 17-02-2014
Just use an m8 bolt? If you got the stud out
RE: Urgently needed, hdi inlet elbow studs - ozonehostile - 17-02-2014
(17-02-2014, 05:20 PM)Chris_90 Wrote: Just use an m8 bolt? If you got the stud outIl give it a go
RE: Urgently needed, hdi inlet elbow studs - Chris_90 - 17-02-2014
Worth a try even for temporary why you get some studs
RE: Urgently needed, hdi inlet elbow studs - Danny2009 - 17-02-2014
Will 110 hdi ones be the same? If so I have a set
RE: Urgently needed, hdi inlet elbow studs - Slam Wagon - 18-02-2014
Ive got a spare engine sat in the garage, only in Stroud so not too far to come and get them.