![]() |
ive messed up Doh! - Printable Version +- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum) +-- Forum: General (https://www.306oc.co.uk/forum/forumdisplay.php?fid=6) +--- Forum: The Couch (https://www.306oc.co.uk/forum/forumdisplay.php?fid=7) +--- Thread: ive messed up Doh! (/showthread.php?tid=21462) Pages:
1
2
|
ive messed up Doh! - cully - 17-02-2014 a word of warning to the masses yesterday was such a fine day i cut up my cast iorn engine mount from my spare engine so out come the disc cutter! chop chop chop and admire my work................ [attachment=13658] well this has bit me in the ass big time! go to get in my estate to go to work first thing windsreen wipers on "scrape" sounds like ice didnt think it was that cold........ NO it weren't its covered in fine grit...you know were this is going now... get to the garage to clean it off it wont shift! look at the rest of the car its all covered in grit the grit it cast iorn filings from the cutting disc and its stuck all over the car bummer! OH FECK! theres 3 cars on the drive one being the nice clean white 6 phonecall from work to lewis at home go check the car his words were its orange! everything is covered in the dust and has rusted over night and stained all the cars i didnt cut no where near the cars but the wind carryed the dust over the damp cars were it rusted ive washed off the 6 and ive had to clay bar it to remove the spots now it needs superesin polishing to remove the orange staining FML ive got 3 cars to do........... RE: ive messed up Doh! - Sian - 17-02-2014 Oh no not the 6! RE: ive messed up Doh! - ginge191 - 17-02-2014 ![]() What a series of unfortunate events! Amazing! RE: ive messed up Doh! - Midnightclub - 17-02-2014 Might sound stupid but could you have not used a magnet to just pull the filings off the car? RE: ive messed up Doh! - bigcheez2k3 - 17-02-2014 Please say you have pics of this ![]() RE: ive messed up Doh! - cully - 17-02-2014 no pictures the estate looks like someones thrown orange sand on it ive had to clay bar the windscreens to get it off magnet wont get it off as its its started to rust and stuck to the paint ![]() RE: ive messed up Doh! - sam - 17-02-2014 Harsh one chap RE: ive messed up Doh! - Tom - 17-02-2014 Didnt know claying could get it out lol. RE: ive messed up Doh! - Toms306 - 17-02-2014 Oops! ![]() It's unlike you to mess up, Cully! Though I'd never have forseen that happening either tbh! RE: ive messed up Doh! - Danny2009 - 17-02-2014 Grinding near any car is a disaster waiting to happen nightmare when it burns into the glass it Dosent come out RE: ive messed up Doh! - cully - 17-02-2014 (17-02-2014, 05:11 PM)Danny2009 Wrote: Grinding near any car is a disaster waiting to happen nightmare when it burns into the glass it Dosent come out i was well away from the cars but the dust must of carryed on the wind and stuck on the wet cars RE: ive messed up Doh! - Danny2009 - 17-02-2014 Don't know how far away you was but grinding sparks fly 6ft+ from the grinder Least it's correctable ![]() RE: ive messed up Doh! - cully - 17-02-2014 i was 20 ft away and behind two fence panels and around the corner of a garage the grindings did well to find the cars ![]() RE: ive messed up Doh! - Eeyore - 17-02-2014 Wahhh waaaahhhhhhhh RE: ive messed up Doh! - procta - 17-02-2014 cully it happened to my dad, when he cut the donor mgf up! its f*cked the metros windows screen and the 306 driver side window! also showered his jeep too! I took a Stanley knife and tried to etch some of it off. worked a little. RE: ive messed up Doh! - ConorTRG - 17-02-2014 Get yourself some fallout remover. RE: ive messed up Doh! - swampy - 17-02-2014 Want to hope it didn't land on any of the neighbours cars RE: ive messed up Doh! - Danny2009 - 17-02-2014 Fair enough mate! That's shit luck RE: ive messed up Doh! - JethroJay - 17-02-2014 I can't help but lol at this, I've done something the same as this but with spray paint, spraying my Astra bonnet matt black, paint flew along with the wind, covered the 6 cars that was parked up in black paint, main one been my Astra, windscreen covered in it (could only JUST see out of it) all the drivers side was covered in it, roof was, boot was, rear window was, little specs of it all over a white S3 Audi that was brand new and less then a week old, yeah I messed up and it wasn't even that windy, FML! RE: ive messed up Doh! - mikey b - 17-02-2014 I had this on my mark 1 escort the chap before me cut out all the floor pans with the glass in buggerd it all RE: ive messed up Doh! - Jenkosowls - 17-02-2014 Iron fall out remover don't clay it just yet RE: ive messed up Doh! - WiNgNuTz - 17-02-2014 You weren't defending yourself imo, you were antagonising the situation. Carry on, and you'll get more warnings. RE: ive messed up Doh! - Piggy - 17-02-2014 Bugger off puggy... Gutting Cully. Horrid lesson to learn. Feel for you pal. I think you have got away lightly though, I have seen it melt into the body/glass RE: ive messed up Doh! - 7057sam - 17-02-2014 Feel for you mate, hope you can sort it. RE: ive messed up Doh! - Atterz - 17-02-2014 Use some Iron X on it, hopefully it'll come off. Feel for you mate, not ideal! RE: ive messed up Doh! - THE_Liam - 17-02-2014 Jesus mate, that's pretty bloody unlucky ![]() RE: ive messed up Doh! - ally406 - 17-02-2014 What a ball ache. Try some Auto Glym Tarmac Remover. I once turned both sides of a car brown with dust from some super aggressive brake pads that liked to spark molten iron filings. The AG did a not bad job applied with a spray bottle, let it soak a little, then wipe with micro fibre. RE: ive messed up Doh! - Dave - 17-02-2014 I was welding near my mums kitchen windows for some odd reason, safe to say they are not quite as clear as they once were..... Your not the only one to mess up that sucks chap ![]() RE: ive messed up Doh! - 7057sam - 18-02-2014 Any news ?? Did you get it all remove ? RE: ive messed up Doh! - cully - 18-02-2014 the white 6 is not too bad i clay'd the car in the rain yesterday needs a good mop over now may get some of the iorn x or fallout remover looks good stuff even if its just for the wheels do Halfords stock it? the estate looks a mess i could cry ![]() |