+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16)
+--- Forum: XUD Section (https://www.306oc.co.uk/forum/forumdisplay.php?fid=11)
+--- Thread: oil cooler sandwich plate adaptor (/showthread.php?tid=21149)
oil cooler sandwich plate adaptor - Chris_90 - 06-02-2014
So want to fit the sandwich plate with out the original oil cooler/heat transfer thing.
So what adaptor do I need I'm struggling with room as it is so could do with out the original oil plate there.
RE: oil cooler sandwich plate adaptor - Tom - 06-02-2014
Just keep the thing. Theres no real need to remove it
RE: oil cooler sandwich plate adaptor - Daniel306 - 06-02-2014
The 205 had a 45* adapter that pointed the filter vertical, you can then fit it all in
RE: oil cooler sandwich plate adaptor - Chris_90 - 06-02-2014
(06-02-2014, 02:16 PM)Tom Wrote: Just keep the thing. Theres no real need to remove it
It won't be plumed in and it will make me lose an inch+ of room and I need all the room I can get!
(06-02-2014, 02:23 PM)Daniel306 Wrote: The 205 had a 45* adapter that pointed the filter vertical, you can then fit it all in
Any pics were can I get one from?
RE: oil cooler sandwich plate adaptor - mr_fish - 06-02-2014
you could use a DW8 cooler plate, as they are fair bit thinner than a 306 one.
saying that you could use the DW8 adaptor that bolts into the engine to secure your sandwich plate.
RE: oil cooler sandwich plate adaptor - Chris_90 - 06-02-2014
(06-02-2014, 03:33 PM)mr_fish Wrote: you could use a DW8 cooler plate, as they are fair bit thinner than a 306 one.
saying that you could use the DW8 adaptor that bolts into the engine to secure your sandwich plate.
Might look in to that, got an idea that will try tomorrow but if that don't work will go look at scrappy.
RE: oil cooler sandwich plate adaptor - Daniel306 - 06-02-2014
![[Image: GvC1k.jpg]](http://i.imgur.com/GvC1k.jpg)
Thats a google image but you can see the filter is relocated
RE: oil cooler sandwich plate adaptor - Chris_90 - 06-02-2014
Oh yer looks good idea if I could find the right bit to do it.
RE: oil cooler sandwich plate adaptor - Daniel306 - 06-02-2014
Iv got one spare, possibly needs a neew o-ring tho
RE: oil cooler sandwich plate adaptor - Chris_90 - 06-02-2014
(06-02-2014, 06:55 PM)Daniel306 Wrote: Iv got one spare, possibly needs a neew o-ring tho
Could you get me a pic? If you can and will just a normal o ring fit? Or is it a main dealer job?
RE: oil cooler sandwich plate adaptor - Chris_90 - 07-02-2014
This is what I need for it thanks for Ash_23 for being in touch about it
http://m.ebay.co.uk/itm/251362788095
RE: oil cooler sandwich plate adaptor - Tom - 07-02-2014
Dont get that angled thing, think how messy oil changes would be!
RE: oil cooler sandwich plate adaptor - Chris_90 - 07-02-2014
(07-02-2014, 09:47 AM)Tom Wrote: Dont get that angled thing, think how messy oil changes would be!
Theres no need now i ordered the thread thing for it
