+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: 306 Repairs & Mods (https://www.306oc.co.uk/forum/forumdisplay.php?fid=22)
+--- Forum: Electrics (https://www.306oc.co.uk/forum/forumdisplay.php?fid=23)
+--- Thread: Clock and temperature display. (/showthread.php?tid=20993)
Clock and temperature display. - Mikey - 01-02-2014
My clock back lighting is not working, I have changed the two bulbs but they don't light up, the clock is working just the globes don't light up. Does this mean I have to get another clock or is there something else I can do? Thanks.[/u]
RE: Clock and temperature display. - Toms306 - 01-02-2014
Sounds more like the illumination wire has broken somewhere, would check to see if that's got voltage before replacing the clock.
RE: Clock and temperature display. - Mikey - 01-02-2014
Thanks I will check it.
RE: Clock and temperature display. - Mattcheese31 - 02-02-2014
don't know what Tom's on about, it will be the bulbs that have blown, 99.9% sure lol . . . . .just replace them .
RE: Clock and temperature display. - Toms306 - 02-02-2014
He's already changed the bulbs with no effect...
RE: Clock and temperature display. - Mattcheese31 - 02-02-2014
(02-02-2014, 03:06 PM)Toms306 Wrote: He's already changed the bulbs with no effect...
sorry mate my bad, i'll give myself a warning. . .
RE: Clock and temperature display. - Toms306 - 02-02-2014
Haha, no worries.
RE: Clock and temperature display. - DeeTurbo - 02-02-2014
Are you using the right type of bulbs? If I remember correctly the bulbs in that display are not the same as others that size, the contacts are in a different place on the holders. I think that's why I ended up paying something like £7 per bulb from the dealers years ago.
RE: Clock and temperature display. - Craigus - 02-02-2014
Try turning the bulb holders a bit
RE: Clock and temperature display. - underground375 - 02-02-2014
Give it a slap they normally come on that way!!
RE: Clock and temperature display. - Mikey - 03-02-2014
(02-02-2014, 10:07 PM)DeeTurbo Wrote: Are you using the right type of bulbs? If I remember correctly the bulbs in that display are not the same as others that size, the contacts are in a different place on the holders. I think that's why I ended up paying something like £7 per bulb from the dealers years ago.
Your right I got the wrong bulbs, at a glance they look right but they have different contacts. I will get the right ones and try them Thanks.
RE: Clock and temperature display. - Mikey - 04-02-2014
Clock and temp gauge are working again, all I had to get was a couple of tiny globe inserts from the dealer, they gave me a refund on the ones that were wrong and the inserts only cost a couple of dollars, so it all turned out good. Thanks guys.
RE: Clock and temperature display. - DeeTurbo - 04-02-2014
Bastards, I asked for the holders and they said they only do the bulb and holders together that are soldered together so you can't just change the bulb.
Have you got a part number for what you got?
RE: Clock and temperature display. - Mikey - 05-02-2014
1.2w wedge globe. Part No NG-5301. they just push into the black plastic holders.
RE: Clock and temperature display. - bad2vbone - 01-03-2014
(02-02-2014, 10:28 PM)underground375 Wrote: Give it a slap they normally come on that way!!
Glad that's not just mine then!