+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16)
+--- Forum: XUD Section (https://www.306oc.co.uk/forum/forumdisplay.php?fid=11)
+--- Thread: Tranny Pump (/showthread.php?tid=20770)
Tranny Pump - Dean - 24-01-2014
Am I right in thinking that the tranny pumps "414" are 11mm pumps? or are they 10mm.
Just my local scrappy has a fair few bosch van pumps, and can get the complete pump for £50. Just want a little insight on them before thinking of getting one.
RE: Tranny Pump - Danny2009 - 24-01-2014
Trannys are 11 mm mate
RE: Tranny Pump - Tom - 24-01-2014
50quid is steep, i got mine on ebay for 20 in unknown condition. Maybe that was a bargain?
RE: Tranny Pump - Chris_90 - 24-01-2014
(24-01-2014, 11:31 PM)Tom Wrote: 50quid is steep, i got mine on ebay for 20 in unknown condition. Maybe that was a bargain?
£20 was a bargain depends what scrappy are like being off a transit prices normally go up alot I paid £30 for my 11mm but I'm lucky to have a cheap scrappy not far away, the scrappy that is closest to me wants £60 for a standard derv pump off a van be more than that I bet. Just depends £50 sounds fair tho
RE: Tranny Pump - Dean - 24-01-2014
Think you got a bargain there as they go for quite a bit on ebay.
RE: Tranny Pump - Piggy - 24-01-2014
Get one for parts/unknown condition is fine though as you only want the head for the 11mm conversion
RE: Tranny Pump - Tom - 25-01-2014
(24-01-2014, 11:50 PM)Piggy Wrote: Get one for parts/unknown condition is fine though as you only want the head for the 11mm conversion
BUT dont go buying them willy nilly, zx volcan bought one the pictures in his thread the bloody thing was covered in rust.
Tranny Pump - Dean - 25-01-2014
I'll be inspecting it before it comes off.
RE: Tranny Pump - Piggy - 25-01-2014
(25-01-2014, 12:33 AM)Tom Wrote:(24-01-2014, 11:50 PM)Piggy Wrote: Get one for parts/unknown condition is fine though as you only want the head for the 11mm conversion
BUT dont go buying them willy nilly, zx volcan bought one the pictures in his thread the bloody thing was covered in rust.
Yeah but just coz its got a bit of corrosion on the outside doesnt mean the inside isnt fine, esp as it is just the head you need
RE: Tranny Pump - darrenjlobb - 25-01-2014
20 quid a pop down st day.
RE: Tranny Pump - Tom - 25-01-2014
(25-01-2014, 08:35 AM)Piggy Wrote:(25-01-2014, 12:33 AM)Tom Wrote:(24-01-2014, 11:50 PM)Piggy Wrote: Get one for parts/unknown condition is fine though as you only want the head for the 11mm conversion
BUT dont go buying them willy nilly, zx volcan bought one the pictures in his thread the bloody thing was covered in rust.
Yeah but just coz its got a bit of corrosion on the outside doesnt mean the inside isnt fine, esp as it is just the head you need
Thats not what im saying. From what i've seen, outside condition is no indication of inside condition. Its in his project thread the whole head of it was growing with rust and that was all over the spill port on the interesting side of the distributor head.
RE: Tranny Pump - Dean - 25-01-2014
Well if any of you lot in cornwall manage to find one for 20 quid, get it for me
