![]() |
306 hdi takes longer to start and won't rev past 2500? - Printable Version +- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum) +-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16) +--- Forum: DW10 HDi section (https://www.306oc.co.uk/forum/forumdisplay.php?fid=10) +--- Thread: 306 hdi takes longer to start and won't rev past 2500? (/showthread.php?tid=20614) |
306 hdi takes longer to start and won't rev past 2500? - maguire1992 - 20-01-2014 Recently put a seal kit in my high pressure pump and the car would not start so I towed her and now she will But seems to be in limp mode Had no issues before all that was wrong was a diesel leak Here is the faults I'm getting ![]() And here is some live data ![]() ![]() RE: 306 hdi takes longer to start and won't rev past 2500? - powerandtorque - 20-01-2014 Best guess would be that "Air flow sensor" related error putting the ECU in limp home mode. RE: 306 hdi takes longer to start and won't rev past 2500? - Midnightclub - 20-01-2014 A quick thing to test to, just unplug it and see if there's any changes. RE: 306 hdi takes longer to start and won't rev past 2500? - rd070707 - 20-01-2014 Just to clarify, we unplugged the MAF and it still started the same and was still in limp. As above the pump has been changed so unless there's a loss of pressure there, plus the fpr has been changed but he hasn't cleaned it so he's gonna do that RE: 306 hdi takes longer to start and won't rev past 2500? - Poodle - 20-01-2014 Itd be a lot easier if this was all kept in one thread guys. RE: 306 hdi takes longer to start and won't rev past 2500? - darrenjlobb - 20-01-2014 Please just stick to the other thread guys. I will lock this and remove later. |