+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: 306 Repairs & Mods (https://www.306oc.co.uk/forum/forumdisplay.php?fid=22)
+--- Forum: Suspension, Transmission, Handling & Braking (https://www.306oc.co.uk/forum/forumdisplay.php?fid=19)
+--- Thread: Stud conversion sizes.. (/showthread.php?tid=20316)
Stud conversion sizes.. - Wor Jimmy - 10-01-2014
Reet i need some sizes off you guys/girls!
I am making some wheel spacers with a stud conversion. to a different PCD to stock.
what i need is the size between the back mating face of the wheel and the front under the nut. (See pic Paint
) or even if some one can measure an already done conversion and tell me then length of the protruding thread from the back face off the wheel.Thanks in advance peeps.
Re: Stud conversion sizes.. - kentiiboii - 10-01-2014
The stud had to be I have 15mm spacers and needed 70mm studs.
RE: Stud conversion sizes.. - Dum-Dum - 10-01-2014
It is a different size on every wheel, it isn't a standard size.
You need to go into the hub and any wheel nut by 10mm (thats 8 turns on the standard thread)
RE: Stud conversion sizes.. - Wor Jimmy - 10-01-2014
(10-01-2014, 08:39 PM)Dum-Dum Wrote: It is a different size on every wheel, it isn't a standard size.
You need to go into the hub and any wheel nut by 10mm (thats 8 turns on the standard thread)
Balls.. Heres me thinking this would be easy haha.
might just make them over length and part off the extra as needed.
Re: Stud conversion sizes.. - kentiiboii - 10-01-2014
I know most places do them in 50,60,80mm that way you can work out your self which you need.
RE: Stud conversion sizes.. - Wor Jimmy - 10-01-2014
(10-01-2014, 10:16 PM)kentiiboii Wrote: I know most places do them in 50,60,80mm that way you can work out your self which you need.
60 is what i think i will need. Might just order a few and check.