![]() |
Garlicbreads Uni Project D Turbo - Printable Version +- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum) +-- Forum: Photos and Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=20) +--- Forum: 306 Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=3) +--- Thread: Garlicbreads Uni Project D Turbo (/showthread.php?tid=2022) Pages:
1
2
|
Garlicbreads Uni Project D Turbo - Garlicbread - 06-03-2012 Hi all! I bought the beast on thursday evening in swindon, got there at 8 and by the time i got back home it was 12 30!! ![]() Anyways pics..... ![]() ![]() ![]() ![]() well it would be rude not to..... ![]() ![]() ![]() Gave it a quick polish yesterday and it hadnt had a polish for years! my chamois was a white/grey! Paid £250 some service history, 105k unfortunately lucas pump ![]() Plans: This is mainly for my uni project so it is going to be chargecooled, reason being as not many people do it, give me good grades at the end and i get more hands on experience on 306s. -Chargecool it -Remove roof bars -add door pins (doors dont stay open) -fix drivers side electric window switches -fix temp display on dash -fix rear bumper it also has an issue starting, it cranks over at a decent speed but doesnt fire just stutters really, it starts much easier on jump leads and once it starts there is a bit of blue smoke for 30 seconds or so. Will post a vid when i get the chance. It has been sat a while so i guess it will need a new battery. Looking forward to getting my hands dirty and working on it All comments welcome ![]() Garlicbreads Project D Turbo - Matt - 06-03-2012 Looks good mate! 3dr white ftw!!!! More of these popping up now I'm spraying mine though haha Re: Garlicbreads Uni Project D Turbo - Dan! - 06-03-2012 White 3dr! :O Sell it to me ![]() Re: Garlicbreads Uni Project D Turbo - Foxy-jim - 06-03-2012 Looks awesome! Can I lower it? Haha. Re: Garlicbreads Uni Project D Turbo - Garlicbread - 06-03-2012 Yea the bodywork is fairly good condition, couple dents, small patch of rust and a big crack in the rear bumper but tbh im more fussed on the mechanical side of things as thats what my project is about, would like to get it done if i have any spare monies! You are more than welcome to lower it james! however it will probs be a bitch and the missus doesnt want to lower it too much as she may have the car after i finish with it, providing she passes her test ![]() Re: Garlicbreads Uni Project D Turbo - Foxy-jim - 06-03-2012 I will tell her I will only do it a little bit...haha. Re: Garlicbreads Uni Project D Turbo - Garlicbread - 06-03-2012 Your little bit is 60mm! Haha! Re: Garlicbreads Uni Project D Turbo - Foxy-jim - 06-03-2012 90! Re: Garlicbreads Uni Project D Turbo - Garlicbread - 06-03-2012 Sorry my bad! ![]() Garlicbreads Uni Project D Turbo - Matt - 06-03-2012 Stick it at 40. Job done! Foxy wanna sort my new beam out for me? Re: Garlicbreads Uni Project D Turbo - Foxy-jim - 06-03-2012 Maybe. What you want doing to it? Garlicbreads Uni Project D Turbo - Matt - 06-03-2012 Lowering. Bought a s16 beam to replace my fubard one. Re: Garlicbreads Uni Project D Turbo - Ben Jay - 06-03-2012 you going to sell the roof bars? Might be interested! Re: Garlicbreads Uni Project D Turbo - Foxy-jim - 06-03-2012 Ok Matt awesome! I've done mine the notch method, but that's onl because it does need a proper refurb soon anyway. May pm krisB as I have never messed about with the bearing in there etc. Garlicbreads Uni Project D Turbo - Matt - 06-03-2012 Bars out is quite easy, just don't have the tools myself to get on and do it. Re: Garlicbreads Uni Project D Turbo - Foxy-jim - 06-03-2012 I have tools! Wanna do a weekend and do both beams? Re: Garlicbreads Uni Project D Turbo - silverzx - 06-03-2012 Foxy-jim Wrote:I have tools! Wanna do a weekend and do both beams? Include me in this too please lads. ![]() Also, white 3 door DTub!? I'm very jealous... Re: Garlicbreads Uni Project D Turbo - Foxy-jim - 06-03-2012 I can do yours whenever! Let me know when ou are free! Re: Garlicbreads Uni Project D Turbo - 4WayDiablo - 06-03-2012 It looks good but imo needs some epic lowerage! Lol Re: Garlicbreads Uni Project D Turbo - Foxy-jim - 06-03-2012 I will sort that! Re: Garlicbreads Uni Project D Turbo - Garlicbread - 06-03-2012 yeah id really appreciate a hand lowering it, james do u have a spring compressor?? ........roof bars are coming off but there is a lock which needs the key which i didnt get when i bought the car, they are only halfords ones. If when they come off they are re-useable then i will consider selling them. Re: Garlicbreads Uni Project D Turbo - Foxy-jim - 06-03-2012 I don't but my friend does! Re: Garlicbreads Uni Project D Turbo - Connor - 06-03-2012 Mate if you wanted something to charge cool, you could of done mine ![]() Re: Garlicbreads Uni Project D Turbo - kingy - 06-03-2012 thats the lowering sorted, just need a nice set of 205 gti alloys in white wiyh good tyers. hang on a minute, ive got some for sale. Re: Garlicbreads Uni Project D Turbo - Jimmer021 - 06-03-2012 As I said in my thread your welcome to come and have a look at the charge cooler setup on the dimma, it's quiet simple really, and saves having to cut anything to fit boost pipes through and also keeps the piping nice and short ![]() Re: Garlicbreads Uni Project D Turbo - samass - 07-03-2012 mmm white carrr whats your uni project on exactly? Re: Garlicbreads Uni Project D Turbo - Garlicbread - 07-03-2012 Connor Wrote:Mate if you wanted something to charge cool, you could of done mineI thought you were doing yours up anyway? kingy Wrote:thats the lowering sorted, just need a nice set of 205 gti alloys in white wiyh good tyers. hang on a minute, ive got some for sale. Nice try ![]() Jimmer021 Wrote:As I said in my thread your welcome to come and have a look at the charge cooler setup on the dimma, it's quiet simple really, and saves having to cut anything to fit boost pipes through and also keeps the piping nice and short Thanks mate! will have to come over and have a bez soon as im currently buying all my parts for it so just want to make sure im getting all the right stuff! samass Wrote:mmm white carrr Im Chargecooling it, basically it uses water to cool the pressurised air going into the engine instead of air like an intercooler ![]() Foxy-jim Wrote:I don't but my friend does! Well if we borrowed it we could crack it out in a day?? most of the time will probs be spent on the rear beam though! ![]() Re: Garlicbreads Uni Project D Turbo - Foxy-jim - 07-03-2012 Ye I'm sure we could do it! Over the Easter holidays? Re: Garlicbreads Uni Project D Turbo - Garlicbread - 07-03-2012 Yea sure! i will have to get some cheap lowering springs off ebay ![]() When are the easter holidays?? Re: Garlicbreads Uni Project D Turbo - Foxy-jim - 07-03-2012 Basically start of April. I have three weeks off! |