+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: General (https://www.306oc.co.uk/forum/forumdisplay.php?fid=6)
+--- Forum: Newbies (https://www.306oc.co.uk/forum/forumdisplay.php?fid=24)
+--- Thread: Newbie (/showthread.php?tid=19985)
Newbie - Ryry_1 - 30-12-2013
Hi I'm Ryan and I got a phase 1 306 1.6 xs any tips on lowering the back end
RE: Newbie - daniel909 - 31-12-2013
Welcome and had a look at Darren lobbs video on YouTube.
RE: Newbie - THE_Liam - 31-12-2013
Welcome mate
As said Darren's videos are very good, there's a guide in the guide section as well. My advice would be soak everything in penetrating oil the day before and get a good slide hammer!
RE: Newbie - Craigus - 31-12-2013
Welcome mate
RE: Newbie - mcvite - 31-12-2013
Welcome to the forum
RE: Newbie - Ryry_1 - 31-12-2013
Thanks for the advice. The cars not long had new back as so I shall be trying to lower soon as
RE: Newbie - Ryry_1 - 31-12-2013
Also anyone be able a good ride height for front? as been reading if go any lower than 60mm on front it handles shit? so I want something that will handle and still look good on 15s
RE: Newbie - WiNgNuTz - 31-12-2013
Welcome along. As i've just said in your other thread, i reckon 60mm should do you just fine, thats where mine is, and its low enough without being uncomfortable or scraping too much. If you're doing the torsion bar, i would also recommend plenty of penetrating fluid, a slide hammer with decent high tensile bolts, and a BFO hammer for if that fails.
Oh yeah, and a good set of lungs, you'll probably end up shouting at it a lot....it really does help!
RE: Newbie - Ryry_1 - 31-12-2013
Ok thanks for the advice. Will see how it goes and try get pic up of before and after
RE: Newbie - Frosty - 31-12-2013
Welcome. I see your another new Devon member
RE: Newbie - Ryry_1 - 31-12-2013
Yeah only bought the 306 as was cheap so fort will keep it and see how it goes
RE: Newbie - Herby7 - 04-01-2014
Welcome
RE: Newbie - Sian - 04-01-2014
Ryan holley we meet again haha! Hope your alright stranger! Welcome
RE: Newbie - mikey b - 05-01-2014
Welcome along and as above think there are a few guides in here about the axel
RE: Newbie - Matt - 05-01-2014
Welcome along
get some pictures up
RE: Newbie - Ryry_1 - 05-01-2014
How do you put pictures up?
RE: Newbie - dturbodave - 05-01-2014
Welcome lad!
RE: Newbie - Ryry_1 - 05-01-2014
thanks all will try get few pics up although havent got round to doin anything apart from change wheels
[attachment=12488]
got bored so decideded to colour code center console
[attachment=12486]
wheels that come on the car
[attachment=12487]
new wheels on just needs be lowered
RE: Newbie - mr_fish - 06-01-2014
Welcome fellow Devonshire member.