+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Photos and Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=20)
+--- Forum: 306 Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=3)
+--- Thread: black ph2 306 project (/showthread.php?tid=19976)
black ph2 306 project - Teddy - 30-12-2013
bought a ph2 for £200 from a lad near me lucas pump has died and so has turbo so instead off breaking it like i usually do
thought i might as well save it and do it up. doing mainly body work atm till i decide what turbo to put on got a 10mm bosch ready to go on as well.how i bought it
[attachment=12324]
[attachment=12325]
finally got into yard
[attachment=12326]
had a very bad rusty wing so i got danny hall of the oc to spray me 1 up
[attachment=12327]
finally got round to start working onto it soaking rear axle in wd40 ready to be lowered and removing bumper and wing
[attachment=12328]
also bought a ph3 bumper off danny and some new skirts
[attachment=12329]
finally got the got the back lowered after a lot off swearing and a sledge hammer
[attachment=12330]
does need to go down a bit more on coilovers at front but looking gd how it stands atm
[attachment=12331]
1/1/2014 small update gave it a gd wash and wax today and started to strip engine
[attachment=12360]
RE: my £200 306 project - Piggy - 30-12-2013
erm...nice pics
RE: my £200 306 project - Teddy - 30-12-2013
just seen :/ will sort it
why wont my pics come up ;( do i have to add them as a attachment
RE: my £200 306 project - Teddy - 30-12-2013
sorted now
RE: my £200 306 project - Craigus - 30-12-2013
You've been busy! haha looks good tho mate
RE: my £200 306 project - Teddy - 30-12-2013
cheers pal wasnt aloud it in yard until after christmas so couldnt do much intil now
RE: my £200 306 project - Chris_90 - 30-12-2013
Looks great really would like a black 306 d turbo
swap for a rusty 205? 
lol
RE: my £200 306 project - karl1989 - 30-12-2013
Still got wheels?
RE: my £200 306 project - Teddy - 30-12-2013
(30-12-2013, 03:14 PM)Chris_90 Wrote: Looks great really would like a black 306 d turbo
they do look well black i am still looking for a 205 but not a rusty 1
(30-12-2013, 03:24 PM)karl1989 Wrote: Still got wheels?
yer still got them a lad is surpossed to be swaping me some parts for them
RE: my £200 306 project - Piggy - 30-12-2013
nice...I like
RE: my £200 306 project - Eeyore - 30-12-2013
looks good mate.
RE: my £200 306 project - karl1989 - 30-12-2013
What parts. I got a few bits
RE: my £200 306 project - Fezza_rs - 30-12-2013
Would have looked better on my 106 xsi wheels or some rusty 14" steelies
RE: my £200 306 project - Teddy - 30-12-2013
swaping for gti rear beam gti front brake setup and front mount
RE: my £200 306 project - Dum-Dum - 30-12-2013
That's alot of car for £200 mate, makes me miss my black one.
RE: my £200 306 project - Grant - 30-12-2013
Epic car for the money mate!
Looks great
RE: my £200 306 project - Piggy - 30-12-2013
so what was wrong with it to make it so cheap!???
RE: my £200 306 project - Grant - 30-12-2013
Lucas pump and turbo had died, as he said in the OP. Duh!
RE: my £200 306 project - Teddy - 30-12-2013
well lad changed the turbo on and f*cked the high pressure oil feed on it so was pissing oil out when i went to look at it tried cranking it over fuel was just dribbling out off lines so pumps has no pressure
it ows me about £60 atm as sold the gti seats,strut brace,ph2 bumper and clear angel lights so really chuffed with it
RE: my £200 306 project - shaverspeedengineering - 30-12-2013
ide buy that in a flash .. evan in a couple of months like... or do adeal on my 6 ???
RE: my £200 306 project - Piggy - 30-12-2013
(30-12-2013, 05:46 PM)Grant Wrote: Lucas pump and turbo had died, as he said in the OP. Duh!
I even read that earlier...
But I kinda assumed that there may have been more issues hiding...but doesnt seem so, bargain!
RE: my £200 306 project - Teddy - 30-12-2013
had a rusty wind couple off small dents on it worth more than 200 in parts had new coilovers fitted to it as well if the engine is f*cked all ready got a spare in shed
RE: my £200 306 project - Teddy - 31-12-2013
Little update block has got a crack in it so new engine time
RE: my £200 306 project - Danny2009 - 31-12-2013
Nice to see your cracking on lad be running soon
RE: my £200 306 project - Grant - 31-12-2013
You've got to be the only person grinning at the thought of an engine change
RE: my £200 306 project - Teddy - 31-12-2013
Won't take me long will get loader tractor out will be soon out and in
RE: my £200 306 project - anto - 31-12-2013
Even with a f*cked turbo, f*cked pump and cracked engine thats still a complete bargain!
RE: my £200 306 project - Teddy - 31-12-2013
True lad started to strip engine tonight so if any body is Intreasted any engine parts let us know
RE: my £200 306 project - Teddy - 02-01-2014
engine is coming out
![[Image: 1479001_623217587740082_1059993261_n_zpsaa69dfa4.jpg]](http://s1345.photobucket.com/user/Teddy_Haslam/media/1479001_623217587740082_1059993261_n_zpsaa69dfa4.jpg.html)
the turbo oil return and a bit off block with it
![[Image: 1011986_623217494406758_1392387222_n_zps6374c033.jpg]](http://s1345.photobucket.com/user/Teddy_Haslam/media/1011986_623217494406758_1392387222_n_zps6374c033.jpg.html)
that will do for today not much left
![[Image: 1533767_623217544406753_1349211830_n_zps36a7a723.jpg]](http://s1345.photobucket.com/user/Teddy_Haslam/media/1533767_623217544406753_1349211830_n_zps36a7a723.jpg.html)
RE: my £200 306 project - Grant - 02-01-2014
Awesome progress. Don't hang about, do ya?