+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: 306 Repairs & Mods (https://www.306oc.co.uk/forum/forumdisplay.php?fid=22)
+--- Forum: Interior, Exterior, ICE (https://www.306oc.co.uk/forum/forumdisplay.php?fid=12)
+--- Thread: 405 Mi16 Alloys (/showthread.php?tid=19815)
Pages:
1
2
405 Mi16 Alloys - Kezzieboy - 22-12-2013
Well, I've sourced myself a decent set of these, so I'm pondering whether to go for them or not. They're pretty rare, only ever seen them on 1 306 (and that was a phase 1), was wondering if anyone had any pictures?
I've done a quick photoshop (this file actually has about 15 sets of compatible wheels on it, some more unusual than others, but my paranoia when it comes to people stealing my ideas means I wont be showing those off
), but you can't beat proper pictures when it comes to picking wheels.[attachment=12199]
Opinions?
RE: 405 Mi16 Alloys - Rippthrough - 22-12-2013
Looks great on my ph1, pity the rest of the car looks shit really.
RE: 405 Mi16 Alloys - zx_volcane - 22-12-2013
They look bad boy, get them on and spaced to fill the arches
RE: 405 Mi16 Alloys - Toms306 - 22-12-2013
I don't usually like these wheels....but they do look pretty good on your 306.
RE: 405 Mi16 Alloys - Grant - 22-12-2013
This needs doing!
RE: 405 Mi16 Alloys - Piggy - 22-12-2013
I love em...
RE: 405 Mi16 Alloys - Kezzieboy - 22-12-2013
(22-12-2013, 10:21 PM)Rippthrough Wrote: Looks great on my ph1, pity the rest of the car looks shit really.
Yours is the car I'm talking about, as you probably guessed
Might try and haggle 'em down a bit further and bag them, got some interesting colour plans that I'm thinking about, too.
RE: 405 Mi16 Alloys - Connor - 23-12-2013
Just do it you mincer, stop fannying about
RE: 405 Mi16 Alloys - Mattcheese31 - 23-12-2013
do it, don't let it stop you because i'm currently refurbing a set to go on my car . .
RE: 405 Mi16 Alloys - Kezzieboy - 23-12-2013
Oh really? You test fitted them at all? I'm not too bothered because yours is another phase 1. What did you pay for yours, if you don't mind me asking?
Also, what spacers are you planning to use?
RE: 405 Mi16 Alloys - Jimbo - 23-12-2013
I had these on my ph1 and used 15mm spacers
You could get away with just spacing rears but looks a bit shit
RE: 405 Mi16 Alloys - Kezzieboy - 23-12-2013
Yeah, I was thinking 15s or 20s all round.
RE: 405 Mi16 Alloys - Mattcheese31 - 23-12-2013
(23-12-2013, 10:07 AM)Kezzieboy Wrote: Oh really? You test fitted them at all? I'm not too bothered because yours is another phase 1. What did you pay for yours, if you don't mind me asking?
Also, what spacers are you planning to use?
£40 and 10mm puts them to the correct offset i believe . .
RE: 405 Mi16 Alloys - HDIkyle - 23-12-2013
Some my fab wheels I would have them ( matts actually before he got them) but I don't need anymore wheels
RE: 405 Mi16 Alloys - Rippthrough - 23-12-2013
I've got 3 sets
RE: 405 Mi16 Alloys - Piggy - 24-12-2013
(23-12-2013, 11:59 PM)Rippthrough Wrote: I've got 3 sets
Wheel whore!!
Whats the weight of them like? I do love them but assumed they heavy
RE: 405 Mi16 Alloys - Mattcheese31 - 24-12-2013
(24-12-2013, 08:10 AM)Piggy Wrote:(23-12-2013, 11:59 PM)Rippthrough Wrote: I've got 3 sets
Wheel whore!!
Whats the weight of them like? I do love them but assumed they heavy
8.5kg . . . haparantly
RE: 405 Mi16 Alloys - mr_fish - 24-12-2013
I also have a set
![[Image: 2013-07-02200620_zpse5a738a7.jpg]](http://i307.photobucket.com/albums/nn313/rallymark1/306oc%20Forum/206%20Project/2013-07-02200620_zpse5a738a7.jpg)
Bit close for my liking though
![[Image: 2013-07-02200643_zps1724a80b.jpg]](http://i307.photobucket.com/albums/nn313/rallymark1/306oc%20Forum/206%20Project/2013-07-02200643_zps1724a80b.jpg)
RE: 405 Mi16 Alloys - Mattcheese31 - 24-12-2013
is that on 283's Mark? . . . . .
RE: 405 Mi16 Alloys - Rippthrough - 24-12-2013
Yeah, around 8.5 IIRC, I weighed 'em once but I can't findwhere I posted it. Similar to cyclones anyway.
RE: 405 Mi16 Alloys - mr_fish - 24-12-2013
Yeah 283's off a 307. I have some 266's off a xsara that might get fitted once the 283's are worn out. Least I can fit some 15" alloys then.
RE: 405 Mi16 Alloys - Mattcheese31 - 24-12-2013
(24-12-2013, 10:02 AM)mr_fish Wrote: Yeah 283's off a 307. I have some 266's off a xsara that might get fitted once the 283's are worn out. Least I can fit some 15" alloys then.
pffft it clears it doesn't it? . . . . what's the issue? . . .i'm going to be popping some over 283's anyway .
RE: 405 Mi16 Alloys - mr_fish - 24-12-2013
(24-12-2013, 10:17 AM)Mattcheese31 Wrote:(24-12-2013, 10:02 AM)mr_fish Wrote: Yeah 283's off a 307. I have some 266's off a xsara that might get fitted once the 283's are worn out. Least I can fit some 15" alloys then.
pffft it clears it doesn't it? . . . . what's the issue? . . .i'm going to be popping some over 283's anyway .
Are you running GTI6 283's?
I think I didn't run them as the 307 caliper has a different design (iirc talking to chris) and was a little close for comfort. Even clones over them are pushing it. Whereas on a 6 clearance is fine.
RE: 405 Mi16 Alloys - Mattcheese31 - 24-12-2013
(24-12-2013, 10:32 AM)mr_fish Wrote:(24-12-2013, 10:17 AM)Mattcheese31 Wrote:(24-12-2013, 10:02 AM)mr_fish Wrote: Yeah 283's off a 307. I have some 266's off a xsara that might get fitted once the 283's are worn out. Least I can fit some 15" alloys then.
pffft it clears it doesn't it? . . . . what's the issue? . . .i'm going to be popping some over 283's anyway .
Are you running GTI6 283's?
I think I didn't run them as the 307 caliper has a different design (iirc talking to chris) and was a little close for comfort. Even clones over them are pushing it. Whereas on a 6 clearance is fine.
yes from a 6 mate, cheers for that info . .
RE: 405 Mi16 Alloys - zx_volcane - 24-12-2013
(24-12-2013, 10:32 AM)mr_fish Wrote:(24-12-2013, 10:17 AM)Mattcheese31 Wrote:(24-12-2013, 10:02 AM)mr_fish Wrote: Yeah 283's off a 307. I have some 266's off a xsara that might get fitted once the 283's are worn out. Least I can fit some 15" alloys then.
pffft it clears it doesn't it? . . . . what's the issue? . . .i'm going to be popping some over 283's anyway .
Are you running GTI6 283's?
I think I didn't run them as the 307 caliper has a different design (iirc talking to chris) and was a little close for comfort. Even clones over them are pushing it. Whereas on a 6 clearance is fine.
If they turn, they clear
I had to move the wheel weights on the 205 speedlines to get them to clear 6 brakes on the zx, I think there was about 1mm clearance in the end :p
RE: 405 Mi16 Alloys - mr_fish - 24-12-2013
(24-12-2013, 11:18 AM)zx_volcane Wrote:(24-12-2013, 10:32 AM)mr_fish Wrote:(24-12-2013, 10:17 AM)Mattcheese31 Wrote: pffft it clears it doesn't it? . . . . what's the issue? . . .i'm going to be popping some over 283's anyway .
Are you running GTI6 283's?
I think I didn't run them as the 307 caliper has a different design (iirc talking to chris) and was a little close for comfort. Even clones over them are pushing it. Whereas on a 6 clearance is fine.
If they turn, they clear
I had to move the wheel weights on the 205 speedlines to get them to clear 6 brakes on the zx, I think there was about 1mm clearance in the end :p
hmmm, perhaps I need to take a dose of MTFU and fit them to see how they look.
Need to paint the centre caps first
RE: 405 Mi16 Alloys - Ruan - 24-12-2013
Not as bad as 266s on Harriers.
I scraped all the mud and crud off the inside of the wheel... They're that tight.
RE: 405 Mi16 Alloys - Rippthrough - 24-12-2013
Some of the 307 calipers have 10mm more backspacing on them so you get shitloads of wheel clearance, that's what I'm running.
RE: 405 Mi16 Alloys - RetroPug - 05-01-2014
Anyone got any pictures of these on a 3-door Ph.1?
405 Mi16 Alloys - mr_fish - 05-01-2014
(05-01-2014, 04:41 PM)RetroPug Wrote: Anyone got any pictures of these on a 3-door Ph.1?
Think Jimbo does