![]() |
Bosch pump for 6 cylinder - Printable Version +- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum) +-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16) +--- Forum: XUD Section (https://www.306oc.co.uk/forum/forumdisplay.php?fid=11) +--- Thread: Bosch pump for 6 cylinder (/showthread.php?tid=19741) |
Bosch pump for 6 cylinder - silverzx - 20-12-2013 Slightly off topic, whats the code for the bosch pump needed to convert a 325 to mechanical? Saw this, could be of use to someone? http://www.ebay.co.uk/itm/Injector-pump-OM606-engined-W124-300D-/191002067097?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item2c789c4099#ht_89wt_1327 RE: Bosch pump for 6 cylinder - HDIkyle - 20-12-2013 Local to me also if it does need posting RE: Bosch pump for 6 cylinder - Tom - 20-12-2013 Thats on inline pump no? Different to the VE... Then again, this isnt ve specific forum... Above post is almost useless, except for getting my post count up. Yay ![]() RE: Bosch pump for 6 cylinder - Martin306 - 20-12-2013 That's a 6 cylinder NAD pump RE: Bosch pump for 6 cylinder - THE_Liam - 20-12-2013 As said, NAD pump so no boost compensator... The one you want for a 325TDS is the one from a 324/524TD, which were never sold over here I don't think... RE: Bosch pump for 6 cylinder - Ruan - 21-12-2013 If you want to use an inline pump, you don't want a compensator, they're shite. But trust me there's no way you'll fit an inline on a tds.... They're HUGE. RE: Bosch pump for 6 cylinder - welshpug - 21-12-2013 if it fitted a straight six merc I'm sure you can make it fit a straight six bimmer... :p RE: Bosch pump for 6 cylinder - silverzx - 21-12-2013 It should fit nicely onto some 6 cylinder diesel turbo audi/bmw/merc though surely! RE: Bosch pump for 6 cylinder - Ruan - 21-12-2013 (21-12-2013, 11:08 AM)welshpug Wrote: if it fitted a straight six merc I'm sure you can make it fit a straight six bimmer... You'd he amazed, they're stupidly long... Unless they were designed to have them, generally they don't fit!! Also they're chain drive from the crankcase, no belts, and have no dynamic timing adjustment... And if they do its centrifugal and built into the drive sprocket... RE: Bosch pump for 6 cylinder - Ruan - 21-12-2013 And that'll have wanky 5.5mm elements I'll bet... |