+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: 306 Repairs & Mods (https://www.306oc.co.uk/forum/forumdisplay.php?fid=22)
+--- Forum: Interior, Exterior, ICE (https://www.306oc.co.uk/forum/forumdisplay.php?fid=12)
+--- Thread: Another Clarion pu2294a(c) thread (/showthread.php?tid=19546)
Another Clarion pu2294a(c) thread - DeeTurbo - 12-12-2013
Hi all,
So after my girlfriends car getting broken into and her sub and amp getting stolen I am going to mount some small subs in the rear quarters, install a hidden amp to power them and swap the Alpine headunit for the standard CD player.
Now, my question is this on the C ISO plug is there an pre amp output? The ISO standard says there should be, if there is I'm thinking of using that for the amp if not I will have to use the high level input on the amp.
Does anyone know of a wiring diagram for the pins on the back of the headunit, I've been looking on google but couldn't find much.
RE: Another Clarion pu2294a(c) thread - cully - 12-12-2013
MAYBE!
c1
pin1 out LR
pin2 out RR
pin3 ground
pin4 out LF
pin5 out RF
pin6 +12v amp sw
RE: Another Clarion pu2294a(c) thread - DeeTurbo - 12-12-2013
Yep, that's what I've found. I will have to do some measuring with an oscilloscope.
Haha, 5v pre out! I wish, that would be awesome if that was right.
Any idea what size connectors you need to go on to the pins there?
RE: Another Clarion pu2294a(c) thread - cully - 12-12-2013
or
or
rd3pinout.pdf (Size: 57.96 KB / Downloads: 95)
RE: Another Clarion pu2294a(c) thread - DeeTurbo - 12-12-2013
Wow, you can get a plug and cable already made up! £9 though, I'll find out if there is any output first before going any further.
http://www.ebay.co.uk/itm/Becker-Mini-ISO-to-RCA-Pre-Out-Adaptor-Lead-Plug-/250858211666?pt=UK_Cars_Parts_Vehicles_Terminals_Cabling_ET&hash=item3a68508952
http://www.ebay.co.uk/itm/CT29AX03-Yellow-Mini-ISO-Connection-Amplifier-RCA-Line-Output-Converter-/150710923660?pt=UK_In_Car_Technology&hash=item231712318c
RE: Another Clarion pu2294a(c) thread - DeeTurbo - 13-12-2013
Bugger, not what I was hoping. It looks like there is no pre-out on these headunits. There is 5v on pins 1 and 2, there is also 10v on pin 4 but no signals on any of the pins.
Looks like I'll be using the high level input on the amp.
Thanks for your help Cully.