+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: General (https://www.306oc.co.uk/forum/forumdisplay.php?fid=6)
+--- Forum: The Couch (https://www.306oc.co.uk/forum/forumdisplay.php?fid=7)
+--- Thread: Biggest size nut on a 306 (/showthread.php?tid=19262)
Biggest size nut on a 306 - Marcus1991 - 01-12-2013
I'm going to stock my self up on tools over the next few months. Anyone know of the biggest size nut on a 306. I think it's 32mm for rear hub nut. Also and handy tools to have aka massive breaker bar
cheers
RE: Biggest size nut on a 306 - Jimbo - 01-12-2013
36mm (well 35) front hub nut on driveshaft
RE: Biggest size nut on a 306 - Dum-Dum - 01-12-2013
Handy tools; lump hammer, sledge hammer, rubber mallet, pry bars, a good crow bar and a 5ft scaffold pole, a set of torx drivers and make sure any set you buy has 11mm and 16mm bits
RE: Biggest size nut on a 306 - C2K - 01-12-2013
Dum dum's list pretty much gets you there. I find torx bits for a ratchet and torx allen keys go in good company.
I just bought an impact gun tbh to speed any process up!
RE: Biggest size nut on a 306 - Marcus1991 - 01-12-2013
Yes! Can't beat a bit of scaffolding haha. Cheers for the advise guys. Some good chizzles as well.
RE: Biggest size nut on a 306 - Pompey306mark - 01-12-2013
The driver.
RE: Biggest size nut on a 306 - C2K - 01-12-2013
(01-12-2013, 05:18 PM)Marcus1991 Wrote: Some good chizzles as well.
chizzle wtf? You mean a chisel!
RE: Biggest size nut on a 306 - londondan86 - 01-12-2013
27mm injector socket, ratchet spanners, 3/8 extension bar for the cambelt tensioner.....
RE: Biggest size nut on a 306 - Seb_Ryan - 01-12-2013
Old paint roller handle for locking flywheel, dont have to take starter out just bend it and u have a lovely tool ha
RE: Biggest size nut on a 306 - Jonny81191 - 01-12-2013
(01-12-2013, 08:32 PM)Seb_Ryan Wrote: Old paint roller handle for locking flywheel, dont have to take starter out just bend it and u have a lovely tool ha
a 5mm allen key also works, just gotta develop the knack of reaching under the starter.
RE: Biggest size nut on a 306 - londondan86 - 01-12-2013
(01-12-2013, 09:59 PM)Jonny81191 Wrote:(01-12-2013, 08:32 PM)Seb_Ryan Wrote: Old paint roller handle for locking flywheel, dont have to take starter out just bend it and u have a lovely tool ha
a 5mm allen key also works, just gotta develop the knack of reaching under the starter.
+1 Bit of a knack as Jonny says but saves the faff of taking the starter off each time
RE: Biggest size nut on a 306 - Piggy - 02-12-2013
a nice 1/4 ratchet set with a stubby ratchet and adapter for little torx and allen keys
Biggest size nut on a 306 - Seid' - 02-12-2013
Cartull box 111 tools and your done :p