+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: 306 Repairs & Mods (https://www.306oc.co.uk/forum/forumdisplay.php?fid=22)
+--- Forum: Electrics (https://www.306oc.co.uk/forum/forumdisplay.php?fid=23)
+--- Thread: Heater blower controls (/showthread.php?tid=18931)
Heater blower controls - anto - 16-11-2013
Right it seems that my heater blower control has given up the ghost.
I only get the blowers working on Nr 4. A new resistor has failed to rectify the problem and there are no fuses gone.
So can the heater controls be fixed or is do i need a new unit?
RE: Heater blower controls - Tom - 16-11-2013
You can take them apart and clean up.
RE: Heater blower controls - anto - 17-11-2013
Cheers Tom.
By "clean up" do you mean clean up any terminals in the controls? Ive never opened a set to know whats in there.
RE: Heater blower controls - Tom - 19-11-2013
Yeah the front of the control unit can like unclip off and you can get at all the contacts in there and bend and clean stuff until it works again.
RE: Heater blower controls - anto - 19-11-2013
Good man Tom.
I actually had that panel off but wasnt sure if i should start messing with it.
RE: Heater blower controls - anto - 22-11-2013
Ok, ive had the heater controls apart and cleaned up all contacts to no avail.
Blowers still only work on Nr 4.
Ive alreadt replaced the rheostat that sits near the scuttle panel.
Is there anything i have missed? The blower motor itself?