+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: For Sale (https://www.306oc.co.uk/forum/forumdisplay.php?fid=26)
+--- Forum: Parts (https://www.306oc.co.uk/forum/forumdisplay.php?fid=25)
+--- Thread: Breaking the meatwagon (/showthread.php?tid=18228)
Pages:
1
2
Breaking the meatwagon - cwspellowe - 21-10-2013
All prices are collected, postage would be extra.
Lots more other bits available, car is ready to be stripped as soon as so allow a day or two to remove parts. First come first served. Car is no longer being sold as a rolling shell so all parts to go.
Paypal preferred but fees to be added if not paying as gift.
Wheels:
16" staggered fitment banded steels. 9J front, 10J rear. I ran them with spacers which WILL need arch extensions, but may get away with them with no spacers. Fitted with nankang ns2 fronts with approx 5mm tread and Toyo T1-S rears with approx 3mm tread.
4x108
65.1mm centre bore, direct Peugeot fitment
£320+postage
25mm bolt on hubcentric wheel spacers with shortened head bolts to hub and studs and nuts to mount wheels £50
Engine/Transmission:
DHY bare block, approx. 100k miles £40 collected
Good condition head with new-ish glow plugs, cam, pulley and vacuum pump £30 collected
Phase 1 Nissens ally rad
90A Mitsubishi alternator £30 posted
6PK1145 aux belt, two weeks old £10 posted
Exide Premium 075TE battery, 12 months old, 600CCA, 60Ah. Full of beans, car starts first time every time £30 collected
Clutch assembly £30
Flywheel £20
DT gearbox £30
Miles’ Group N gear linkages (early non-adjustable version, all retaining clips present) £20
Compbrake style quickshifter inc. gear stick £20
GE gearbox-end quickshift £15
Driveshafts £10ea
Suspension
TA Technix coilies, new last month, new top mounts and bearings and both C spanners £130
Wishbones with good balljoints, 12 months old, £10ea
Hubs £15 ea (16mm ball joint, no ABS sensors)
GTi6 rear beam, refurbished 3 years ago, disc brakes, month old TA Technix rear shocks. Torsion bars are free enough to easily adjust ride height, currently rather low.. £170 with brakes, £150 without
Brakes:
302mm 307XSI180 front calipers and flexis with approx. 8 month old discs and pads, only done a couple of thousand miles £100
Rear calipers ok condition but need seals, passed handbrake efficiency at MOT fine. £30 the pair with discs and pads if they don’t go with the beam
GTi6 master cylinder, two port £15
Bodywork:
Not so sure what people will want, it’s a bit unique. Open to offers on any of it though
Interior:
Impreza Sport front seats £30
On/Off toggle switches £1ea
Leaf print leather rear bench (fits 5-door and estate) good condition with head rests £20
Estate folding parcel shelf, no sags, all locating lugs £10
Stereo:
12” sub and amp, nothing spectacular £30
Alpine Type S front coaxials £15
Pm me or mail me at stancewagon@gmail.com if you want anything
RE: Breaking the meatwagon - kingy - 21-10-2013
Wheels?
RE: Breaking the meatwagon - karl1989 - 21-10-2013
Also wheels
RE: Breaking the meatwagon - zx_volcane - 21-10-2013
Can i have the inlet manifold please?
RE: Breaking the meatwagon - Piggy - 21-10-2013
NACA duct??
got an oil cooler??
RE: Breaking the meatwagon - bigcheez2k3 - 21-10-2013
You missed out the steering wheel. (I think)
How much for FMIC setup incl manifold, posted? Does that include filter to turbo piping too?
RE: Breaking the meatwagon - cwspellowe - 21-10-2013
Manifold is sold already
Wheels are £400 delivered inc tyres, but are part of the rolling shell deal being considered
RE: Breaking the meatwagon - kingy - 21-10-2013
ok mate. ill leave that one then.
RE: Breaking the meatwagon - Piggy - 21-10-2013
(21-10-2013, 07:37 PM)cwspellowe Wrote: Manifold is sold already
Wheels are £400 delivered inc tyres, but are part of the rolling shell deal being considered
what about what I asked for
RE: Breaking the meatwagon - Dean - 21-10-2013
What colour are the impreza seats if the sale doesn't go through?
If the sale doesn't go through i'll have the seats, and the plasmas if you fancy posting..
Actually, where abouts are you? Might be easier to collect them when the car is sorted, but I can pay for them ASAP.
RE: Breaking the meatwagon - cwspellowe - 21-10-2013
Located up in Airdrie buddy, just east of Glasgow. Seats are prov sold pending payment. Can post the dials no bother though.
Piglet, no oil cooler, Naca duct is only one half of it, the frame you can see bolted to the bonnet
RE: Breaking the meatwagon - bigcheez2k3 - 21-10-2013
(21-10-2013, 07:46 PM)Piggy Wrote:(21-10-2013, 07:37 PM)cwspellowe Wrote: Manifold is sold already
Wheels are £400 delivered inc tyres, but are part of the rolling shell deal being considered
what about what I asked for
And me
RE: Breaking the meatwagon - cwspellowe - 21-10-2013
sorry mate. Say £100 posted for the fmic, pipes and a shitload of mikalor clamps?
RE: Breaking the meatwagon - bigcheez2k3 - 21-10-2013
(21-10-2013, 08:08 PM)cwspellowe Wrote:
Does that include piping for filter to turbo?
RE: Breaking the meatwagon - cwspellowe - 21-10-2013
(21-10-2013, 08:13 PM)bigcheez2k3 Wrote:(21-10-2013, 08:08 PM)cwspellowe Wrote:
Does that include piping for filter to turbo?
Nope, just the intercooler side of the turbo
RE: Breaking the meatwagon - bigcheez2k3 - 21-10-2013
(21-10-2013, 08:15 PM)cwspellowe Wrote:(21-10-2013, 08:13 PM)bigcheez2k3 Wrote:(21-10-2013, 08:08 PM)cwspellowe Wrote:
Does that include piping for filter to turbo?
Nope, just the intercooler side of the turbo
Ah poo, I'll pass for now then as I should really concentrate on sorting a filter before an FMIC.
RE: Breaking the meatwagon - karl1989 - 21-10-2013
Have you got a picture of seats incase they don't sell
RE: Breaking the meatwagon - Dean - 21-10-2013
(21-10-2013, 08:02 PM)cwspellowe Wrote: Located up in Airdrie buddy, just east of Glasgow. Seats are prov sold pending payment. Can post the dials no bother though.
Well that isn't far from me mate since im in the North East.
If you don't get the payment for the seat i'll 100% have them and pay for them straight away, just need to find a day off work to come collect them.
If you find out let me know
RE: Breaking the meatwagon - Frosty - 21-10-2013
Any pics of the plasma dials?
RE: Breaking the meatwagon - c.gerrard - 21-10-2013
Can I have the turbo for free, if I remove it myself this weekend?
Thanks x
RE: Breaking the meatwagon - cwspellowe - 21-10-2013
(21-10-2013, 09:30 PM)c.gerrard Wrote: Can I have the turbo for free, if I remove it myself this weekend?
Thanks x
Yep, there's a £250 entry fee to the garden though.
RE: Breaking the meatwagon - Dean - 21-10-2013
Btw i need your paypal address lol
Breaking the meatwagon - devils_fuel - 21-10-2013
Do the alpine S's fit in the front door panels without modification etc, any pics of them please mate?
RE: Breaking the meatwagon - sam - 23-10-2013
How much for the front bumper?
RE: Breaking the meatwagon - cwspellowe - 03-11-2013
First post updated, sale for the shell fell through so full car is being broken.
Sam, front bumper is no good mate, its trashed
RE: Breaking the meatwagon - Matt - 03-11-2013
Any of your crazy gear knobs going?
RE: Breaking the meatwagon - cwspellowe - 03-11-2013
Nopes, my awesome Zilla one is now in the E36 and the rest were all binned
Breaking the meatwagon - devils_fuel - 03-11-2013
(21-10-2013, 09:46 PM)devils_fuel Wrote: Do the alpine S's fit in the front door panels without modification etc, any pics of them please mate?
^^
RE: Breaking the meatwagon - cwspellowe - 03-11-2013
Sorry missed that. Yeah they're a direct fit, coaxial speakers. No pics off hand but would only want £15 posted for them
Breaking the meatwagon - devils_fuel - 03-11-2013
(03-11-2013, 09:57 PM)cwspellowe Wrote: Sorry missed that. Yeah they're a direct fit, coaxial speakers. No pics off hand but would only want £15 posted for them
How old & what RMS are they? Very tempted
