+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: 306 Repairs & Mods (https://www.306oc.co.uk/forum/forumdisplay.php?fid=22)
+--- Forum: Electrics (https://www.306oc.co.uk/forum/forumdisplay.php?fid=23)
+--- Thread: boot lock inter' fault (/showthread.php?tid=17578)
boot lock inter' fault - Piggy - 24-09-2013
so weird one...
ph3 boot lock, so no key.
it jammed on locked at castle combe, so I got in via back seats and popped it open.
then it worked fine for a day. this went on for a week.
Got bored of it. So checked wiring loom between body/boot. Looks like new.
Checked lock. Seemed sticky, so stripped down, greased up and it was loads freer. Tried it dozen times and all well.
A car journey later and it did it again.
So swapped lock servo motor.
And its done it AGAIN! grrrr.
what am I missing here?!?!
RE: boot lock inter' fault - Mattcheese31 - 24-09-2013
long shot . . . the rubber adjustable things at the bottom corners of the boot, maybe screwed out too far and holding it tight? like i say long shot . .
RE: boot lock inter' fault - Piggy - 25-09-2013
I'll have a look! I'll take a long shot!
RE: boot lock inter' fault - Face. - 25-09-2013
Not sure this is of any help but here we go,
Had this on my phase 1.
Have you taken the locking unit apart?this:
![[Image: peugeot-306-boot-hatchback-locking-motor-120-p.jpg]](http://www.ncscarspares.co.uk/ekmps/shops/ncsspares/images/peugeot-306-boot-hatchback-locking-motor-120-p.jpg)
.On my phase 1 there was a nylon cog that is connected to the motor.One of the teeth on the cog had wore and occasionally would jam.this might be your problem.I bought a refurbished one on egay for about a tenner.
RE: boot lock inter' fault - Piggy - 25-09-2013
thats the servo motor.
replaced it already. Same fault occurs
RE: boot lock inter' fault - Toms306 - 25-09-2013
Did you check the loom all the way back to the plugs in the rear quarter? If its a new loom might not have been pushed in tight. There's also an earth point around there somewhere iirc.
RE: boot lock inter' fault - Piggy - 25-09-2013
bugger
turns out that I have two buggered servo motors!!!
So, now WANTED: boot servo motor!!
RE: boot lock inter' fault - C2K - 25-09-2013
WD40 the shit out of it tbh!
RE: boot lock inter' fault - Piggy - 26-09-2013
tried that!
RE: boot lock inter' fault - Face. - 27-09-2013
(25-09-2013, 05:20 PM)Piggy Wrote: bugger
turns out that I have two buggered servo motors!!!
So, now WANTED: boot servo motor!!
I was right lol
Ebay and you'll be reet!
RE: boot lock inter' fault - SKoob - 01-10-2013
Are phase 1 and 3 servo motors the same? If they are I've got a working servo motor in the black d turbo you have the rad from
RE: boot lock inter' fault - Piggy - 01-10-2013
yeah they are.
sorted now tho ta!