+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: 306 Repairs & Mods (https://www.306oc.co.uk/forum/forumdisplay.php?fid=22)
+--- Forum: Suspension, Transmission, Handling & Braking (https://www.306oc.co.uk/forum/forumdisplay.php?fid=19)
+--- Thread: fiting a servo (/showthread.php?tid=17561)
fiting a servo - dturbo ash - 23-09-2013
has anyone ever fited a servo to a hdi? Just I need to change mine at weekend,
any help would be nice. Thankyou.
RE: fiting a servo - Piggy - 23-09-2013
not too bad a job...access is just very tight.
why the change? very rare to fail
RE: fiting a servo - dturbo ash - 23-09-2013
When I press brake there a hissing come from servo dose dash have to come out
RE: fiting a servo - Piggy - 23-09-2013
have you checked the hose?!! and connection?
lol, no, dont need to remove dash
RE: fiting a servo - dturbo ash - 23-09-2013
If I move the rod that goes to brake pedal I can make it hiss
I take it bolts from behind dash
RE: fiting a servo - Piggy - 23-09-2013
yeah thats right.
take MC off.
take off the brake pedal connection.
unbolt servo. remove.
may need to rock engine forward to get it out
RE: fiting a servo - dturbo ash - 23-09-2013
I looked under dash I can't see any bolts
RE: fiting a servo - Piggy - 23-09-2013
look harder
RE: fiting a servo - 306Dan - 23-09-2013
There under the sound proofing 4 x 13mm nuts you'll need a knife a long extension and a uj to get them all