Wanted: 266mm caliper bolts - Printable Version +- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum) +-- Forum: For Sale (https://www.306oc.co.uk/forum/forumdisplay.php?fid=26) +--- Forum: Misc & Wanted (https://www.306oc.co.uk/forum/forumdisplay.php?fid=14) +--- Thread: Wanted: 266mm caliper bolts (/showthread.php?tid=16943) |
266mm caliper bolts - Chris_90 - 31-08-2013 I'm after the 2 bolts that hold the caliper/brake pad holder thingy to the hub need them for both sides (4 bolts) any one got some knocking around I can have cheap? RE: 266mm caliper bolts - Piggy - 31-08-2013 they the same as any other caliper bolt?! I do have a set of 306 caliper bolts though if needed? Re: 266mm caliper bolts - aggyj17 - 01-09-2013 The 247mm bolts are a bit longer when I upgraded to 266mm I had to use a washer to make them fit RE: 266mm caliper bolts - Chris_90 - 01-09-2013 (31-08-2013, 09:28 PM)Piggy Wrote: they the same as any other caliper bolt?! there different on the for the 106 i believe, are yours out of the 266mm brakes? Re: RE: 266mm caliper bolts - kentiiboii - 01-09-2013 (01-09-2013, 08:18 AM)Chris_90 Wrote:(31-08-2013, 09:28 PM)Piggy Wrote: they the same as any other caliper bolt?! You mean the carrier bolts? I have a set of 266mm here you can have bolts if you'd like 266mm caliper bolts - devils_fuel - 01-09-2013 (01-09-2013, 08:00 AM)aggyj17 Wrote: The 247mm bolts are a bit longer when I upgraded to 266mm I had to use a washer to make them fit This if you mean calliper carrier bolts, I did exactly the same RE: 266mm caliper bolts - Piggy - 01-09-2013 (01-09-2013, 08:18 AM)Chris_90 Wrote:(31-08-2013, 09:28 PM)Piggy Wrote: they the same as any other caliper bolt?! you sure?!?! I test fitted the 266s to my mrs and all the 106 bolts needed was a washer as already mentioned. yeah I have 4 carrier bolts from 266 306 brakes. RE: 266mm caliper bolts - Chris_90 - 01-09-2013 think i will try the washers then get back to you i just under stood they was to long. |