+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: For Sale (https://www.306oc.co.uk/forum/forumdisplay.php?fid=26)
+--- Forum: Misc & Wanted (https://www.306oc.co.uk/forum/forumdisplay.php?fid=14)
+--- Thread: 1.9d.t FMIC Pipework and adaptor (/showthread.php?tid=16655)
1.9d.t FMIC Pipework and adaptor - eddy_gti6 - 19-08-2013
I am after the adapter plate for the inlet and full pipe work to fit a front mount intercooer on my 1.9 D.Turbo. i already have an intercooler and i will be doing away with the washer bottle and pipes will be going around both front chassis legs.
Or if someone could help me out with a list of pipes needed that would be great.
Thanks
RE: 1.9d.t FMIC Pipework and adaptor - Jenkosowls - 20-08-2013
You'd be better off with a xantia/406 inlet oem looking I went as far as using alloto the pipe work too for an oem looking kit it's not the best of free flowing ones but I was able to use it over 170bhp
RE: 1.9d.t FMIC Pipework and adaptor - eddy_gti6 - 20-08-2013
I cant seem to find any 406/xantia inlets. Been looking on ebay and gumtree all week and still nothing has came up. Where did you get your pipe work from?
RE: 1.9d.t FMIC Pipework and adaptor - kernow_joe - 20-08-2013
Scrap yard is your best bet
RE: 1.9d.t FMIC Pipework and adaptor - eddy_gti6 - 20-08-2013
I will see whats about but scrappys up here are either crap or a rip off!!!
what about using the plastc inlet manifold of a 1.9 diesel 306?
RE: 1.9d.t FMIC Pipework and adaptor - tigerstyle - 20-08-2013
got a picture of what part you need?
RE: 1.9d.t FMIC Pipework and adaptor - eddy_gti6 - 20-08-2013
I basicley need an xasra/406 inlet manifold and all the pipe work to fit a front mount mate. no pics as i dont have the parts to take pics of
RE: 1.9d.t FMIC Pipework and adaptor - tigerstyle - 20-08-2013
From google?
Do XUDs get inside 406s? Aren't they all HDis? it seems someone has said xantia, then it got mixed up with xsara?
There is a pretty good range of XUD Xantia stuff at my local breakers, but my knowledge is in the HDi, so no point me pulling out the wrong stuff for you! (also a few 406/Xsara HDi parts)
RE: 1.9d.t FMIC Pipework and adaptor - eddy_gti6 - 20-08-2013
Ah sorry my mistake with xsara, did mean xantia. i will google a pic for you and post up what i need.
here is a post on here of what it is i need.
http://306oc.co.uk/forum/thread-8290.html