+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: 306 Repairs & Mods (https://www.306oc.co.uk/forum/forumdisplay.php?fid=22)
+--- Forum: Suspension, Transmission, Handling & Braking (https://www.306oc.co.uk/forum/forumdisplay.php?fid=19)
+--- Thread: Bearing number? (/showthread.php?tid=16462)
Bearing number? - cully - 14-08-2013
anyone have the bearing number fo the long driveshaft intermediate bearing?
please
RE: Bearing number? - Niall - 14-08-2013
just take the old one off and measure it?
RE: Bearing number? - cully - 14-08-2013
yes easy answers are best
but i want to replace it once i strip it out not just to get the number and go get it
RE: Bearing number? - Niall - 14-08-2013
surprised you dont have a spare. Most 306 owners have at least 1 replacement for every part on the car
RE: Bearing number? - cully - 14-08-2013
may lay up the 6 as the tax is due then do a big list
shaft bearing
shaft gearbox seals
sump gasket
mains cap rubber seals
may even put a set of new crank big end shells
RE: Bearing number? - Niall - 15-08-2013
These never did have a sump gasket. Was RTV out of the factory.
Good luck dropping the sump though. Ive never done it on a 6 but im pretty sure 2 of the bolts are behind the bell housing.