+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16)
+--- Forum: XUD Section (https://www.306oc.co.uk/forum/forumdisplay.php?fid=11)
+--- Thread: 11mm problems.. (/showthread.php?tid=1614)
11mm problems.. - Seb_Ryan - 18-02-2012
Done 11 pump, and not getting any fuel upto injectors, ive tried changing stop solenoid for and old one, but still doing the same, not sure if they are both f*cked or wether its something else..
Re: 11mm problems.. - londondan86 - 18-02-2012
To confirm solenoid take it off remove the spring and plunger then refit it. Be ready to stall it if it runs away.
Re: 11mm problems.. - Seb_Ryan - 19-02-2012
Right its not the solenoid.. ive got fuel upto where the delivery valves are, but no fuel coming out from them.
Help? lol
Re: 11mm problems.. - Daniel306 - 19-02-2012
did you put the original delivery valves back in?
Re: 11mm problems.. - londondan86 - 19-02-2012
Who built the pump, did it all go back together properly?
Eidit: + What he said ^ lol
Re: 11mm problems.. - Seb_Ryan - 19-02-2012
I did it, and yep all went together properly..
Re: 11mm problems.. - Dave - 20-02-2012
I dont get what you mean, you have fuel upto the delivery valves, but no fuel coming out of them?
Re: 11mm problems.. - londondan86 - 20-02-2012
Dave Wrote:I dont get what you mean, you have fuel upto the delivery valves, but no fuel coming out of them?This. If you crack a union on the top of an injector do you get fuel while cranking?