+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: 306 Repairs & Mods (https://www.306oc.co.uk/forum/forumdisplay.php?fid=22)
+--- Forum: Interior, Exterior, ICE (https://www.306oc.co.uk/forum/forumdisplay.php?fid=12)
+--- Thread: RUST ;( (/showthread.php?tid=16076)
RUST ;( - Teddy - 01-08-2013
decided to strip the back off dturbo today and i found this u couldnt see it from the inside off the arch but when took plastic trim off i found this got a pin hammer out and tapped away and its now about a 10inch hole so know she is being broke ;(
RE: RUST ;( - underground375 - 01-08-2013
Not going to weld it?
RE: RUST ;( - Grant - 01-08-2013
Looks easily weldable
RE: RUST ;( - Teddy - 01-08-2013
nah only payed £400 for car easly get money back from parts
RE: RUST ;( - puglove - 01-08-2013
that's on of the easier ones to fix, but doesn't normally go there
RE: RUST ;( - Piggy - 01-08-2013
no, not so common there...easily fixable
RE: RUST ;( - Danny2009 - 01-08-2013
Another one bites the dust then ehh
RE: RUST ;( - Niall - 01-08-2013
Moved to the correct section
RE: RUST ;( - Jonny81191 - 01-08-2013
Get it welded up, be easily the best option
RE: RUST ;( - Teddy - 02-08-2013
going to be a field car on farm now
RE: RUST ;( - Eeyore - 02-08-2013
standard
RE: RUST ;( - Toms306 - 02-08-2013
Is that against the boot floor? They don't usually go that low.
Its usually around the seatbelt mount.
RE: RUST ;( - Teddy - 02-08-2013
yer its near the boot floor and was starting to go round the seat belt mount as well
RE: RUST ;( - Toms306 - 02-08-2013
Oh right, odd!