+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: For Sale (https://www.306oc.co.uk/forum/forumdisplay.php?fid=26)
+--- Forum: Misc & Wanted (https://www.306oc.co.uk/forum/forumdisplay.php?fid=14)
+--- Thread: Wanted: XUD Parts: engine/loom/hoses or Ph2 DT (/showthread.php?tid=16000)
XUD Parts: engine/loom/hoses or Ph2 DT - ginge191 - 30-07-2013
As titled, im after a few XUD parts - cash waiting
As an ongoing project, im starting a second engine for the 205, but need the 205 as a runner so i can't manage to take it off the road for any period of time to modify the current engine.
XUD 1.9 engine and gearbox
XUD Wiring loom
XUD Radiator hoses (primarily matrix and rad hoses)
Phase 2 sender unit
DT filler neck
DT downpipe exhaust/decat
Bosch pump as an optional extra.
ORRR
If anyone has a phase 2 DT they need rid off, happy to buy the whole lot
If anyone has anything going, please pm me asap
Can collect if local'ish
RE: XUD Parts: engine/loom/hoses or Ph2 DT - Pompey306mark - 30-07-2013
Could have my old engine and stuff. But I need the loom.
Also if not I have dumdum old engine, but needs head gasket.
RE: XUD Parts: engine/loom/hoses or Ph2 DT - ginge191 - 30-07-2013
didn't your old block have head issues? also, what ancillaries are there?
RE: XUD Parts: engine/loom/hoses or Ph2 DT - Piggy - 30-07-2013
Hey ginge, beginning of september I will have all you need, loom, ancillaries, turbo, 11mm pump, pipework, the lot.
recent cambelt, very regularly service, needs head rebuild though as I wacked some headgasket sealer in there after a bodge job
RE: XUD Parts: engine/loom/hoses or Ph2 DT - Danny2009 - 30-07-2013
I've got a engine loom if inhad known could have fetched it fcs!
Have a ph1 decat pipe too
RE: XUD Parts: engine/loom/hoses or Ph2 DT - Piggy - 30-07-2013
(inc engine, gearbox etc and a 10k mile old clutch in the box)
RE: XUD Parts: engine/loom/hoses or Ph2 DT - ginge191 - 30-07-2013
sorry piggy; need this all before then! dang!
RE: XUD Parts: engine/loom/hoses or Ph2 DT - Pompey306mark - 30-07-2013
Yea it does have head issue's but I think you could re torque it for the time beginning. That's what I was going to do.
What's this engine for?
RE: XUD Parts: engine/loom/hoses or Ph2 DT - ginge191 - 30-07-2013
sorry, not a risk taker with XUD's! would like a running lump with no issues.
new project