+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16)
+--- Forum: DW10 HDi section (https://www.306oc.co.uk/forum/forumdisplay.php?fid=10)
+--- Thread: clutch cable change. (/showthread.php?tid=14916)
clutch cable change. - alex-r - 24-06-2013
hi all, been helping an elderly neighbor out to change a clutch cable.. last week i did it in decent time although it was a bit of a pig we got there and it made the pedal a lot lighter for him.
2.0 HDI W reg
i did have a job putting the cable back on, first i put it on the pedal end and then the clutch release arm, we used a pry bar to push the release arm in so i could get the cable on it.
yesterday though the cable came off the clutch pedal end and i can't see why, it all seemed fine.. i pressed it and slipped my foot off the pedal a few times so it would auto adjust a bit.
i'm going to go over later soon and re connect the pedal for him but there must be an easier way than having to use a pry bar on the release arm?
any advice? i'm thinking i could tie some strong wire on the pedal end of the cable while he pulls it so i can connect it..
thanks for reading
