+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16)
+--- Forum: XUD Section (https://www.306oc.co.uk/forum/forumdisplay.php?fid=11)
+--- Thread: Difference between phase 2 xud and hdi dial clusters? (/showthread.php?tid=14894)
Difference between phase 2 xud and hdi dial clusters? - Pompey306mark - 23-06-2013
So going to sell my metal monkey phase 1 clocks and use some phase 2 clocks. Saves changing the wiring over in the car.
But the hdi clocks and phase 2 clocks look the same. So what's the difference?
Cheers.
RE: Difference between phase 2 xud and hdi dial clusters? - ozonehostile - 23-06-2013
dont think there are any differences in them as they are both plug type
RE: Difference between phase 2 xud and hdi dial clusters? - Ruan - 23-06-2013
They're essentially the same, but the HDi is the same style as Petrol clocks, i.e. it's tacho is driven off the ECU, whereas the XUD ones are driven off a VR sensor so won't work.
However, they do just plug in their place.
RE: Difference between phase 2 xud and hdi dial clusters? - Pompey306mark - 24-06-2013
I have seen a few with oil gauges on them, but some say they are hdi and others say they are phase 2.
I have bought a set from a phase 2 now with out the oil gauge, so should be ok.
RE: Difference between phase 2 xud and hdi dial clusters? - Ruan - 25-06-2013
XUDs sometimes have oil level gauges, just depends. Mine does, plugged in and it works perfectly.
RE: Difference between phase 2 xud and hdi dial clusters? - Pompey306mark - 25-06-2013
Might be worth getting another set and ditching the aftermarket one.