+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: For Sale (https://www.306oc.co.uk/forum/forumdisplay.php?fid=26)
+--- Forum: Parts (https://www.306oc.co.uk/forum/forumdisplay.php?fid=25)
+--- Thread: XUD FMIC & inlet adapter (/showthread.php?tid=14593)
Pages:
1
2
XUD FMIC & inlet adapter - puglove - 11-06-2013
Soo looks like im not going back to XUD now
so reluctantly selling my FMIC set up, this Includes* All pipe work
* Pipe clips
* Intercooler inc mounting brackets
* XUD inlet adapter
This is for collection only, CBA with postage. £130 with inlet adapter £110 without can include a real carbon fibre piperX viper induction RRP £160 for an extra £20 recently cleaned and not used since, could do with a paint over the red bits.
266mm calipers, New Xud Cam belts
http://306oc.co.uk/forum/thread-14705.html
XUD exhausts
http://306oc.co.uk/forum/thread-14570.html
aftermarket spoiler
http://306oc.co.uk/forum/thread-13370.html
bosch pump & lines
http://306oc.co.uk/forum/thread-14649.html
Xud full fmic
http://306oc.co.uk/forum/thread-14593.html
RE: XUD FMIC & inlet adapter - Mattcheese31 - 11-06-2013
you're coming to fcs aren't you? . . . .Hmmmmm
any pics looking down on the bay? . .all the pipes beaded and shit? . .
RE: XUD FMIC & inlet adapter - Jimbo - 11-06-2013
Im sure when I did my fmic install I didnt have that much room around the radiator.is ph2 rad smaller than phase 1 due to not having the bottle on the side
RE: XUD FMIC & inlet adapter - puglove - 11-06-2013
(11-06-2013, 08:45 PM)Mattcheese31 Wrote: you're coming to fcs aren't you? . . . .Hmmmmm
any pics looking down on the bay? . .all the pipes beaded and shit? . .
No not all the pipes are beaded, but I ran 20psi through them and they were fine. but idealy looking to get rid before fcs
(11-06-2013, 08:54 PM)Jimbo Wrote: Im sure when I did my fmic install I didnt have that much room around the radiator.is ph2 rad smaller than phase 1 due to not having the bottle on the side
Correct, a slight trim to the leg, and it fits a treat, as that is a ph2 rad in the ph1 pictured above
RE: XUD FMIC & inlet adapter - Jimbo - 11-06-2013
(11-06-2013, 08:54 PM)puglove
[quote='Jimbo Wrote: Im sure when I did my fmic install I didnt have that much room around the radiator.is ph2 rad smaller than phase 1 due to not having the bottle on the side
Correct, a slight trim to the leg, and it fits a treat, as that is a ph2 rad in the ph1 pictured above
[/quote]
Ah if I thought about that I might have routed mine slightly differently never mind.
RE: XUD FMIC & inlet adapter - Mattcheese31 - 12-06-2013
(11-06-2013, 09:15 PM)puglove Wrote:(11-06-2013, 08:45 PM)Mattcheese31 Wrote: you're coming to fcs aren't you? . . . .Hmmmmm
any pics looking down on the bay? . .all the pipes beaded and shit? . .
No not all the pipes are beaded, but I ran 20psi through them and they were fine. but idealy looking to get rid before fcs
(11-06-2013, 08:54 PM)Jimbo Wrote: Im sure when I did my fmic install I didnt have that much room around the radiator.is ph2 rad smaller than phase 1 due to not having the bottle on the side
Correct, a slight trim to the leg, and it fits a treat, as that is a ph2 rad in the ph1 pictured above
well screw you then . .
RE: XUD FMIC & inlet adapter - ginge191 - 12-06-2013
Seperate at all?
RE: XUD FMIC & inlet adapter - puglove - 12-06-2013
Not unless i get interest in all items and will only split adapter from the rest wont split IC from pipes
RE: XUD FMIC & inlet adapter - ginge191 - 12-06-2013
Adapter is what I'm after. Pm me
RE: XUD FMIC & inlet adapter - puglove - 18-06-2013
Bump make me a sensible offer around the asking price
Re: XUD FMIC & inlet adapter - CJ_Derv - 18-06-2013
Bargain!! He bought this off me a while back it will hold 28 psi without beaded ends I can vouch for that and the manifold adaptor was made for me and is a one off and is much better than smaller versions as it is much larger
RE: XUD FMIC & inlet adapter - Mattcheese31 - 19-06-2013
well if you've still got it near FCS i might have it . . .maybe maybe not . . :p
RE: XUD FMIC & inlet adapter - TarnLad2013 - 20-06-2013
Hiya would you take 145 for job lot pal???
RE: XUD FMIC & inlet adapter - puglove - 20-06-2013
Yes i would mate.
RE: XUD FMIC & inlet adapter - TarnLad2013 - 20-06-2013
Inbox me your number please pal will ring you
RE: XUD FMIC & inlet adapter - puglove - 25-06-2013
Bump still here
RE: XUD FMIC & inlet adapter - Matt - 25-06-2013
Any pics fitted?
RE: XUD FMIC & inlet adapter - puglove - 25-06-2013
One at the top of the page from the front
This one from the top
RE: XUD FMIC & inlet adapter - Matt - 25-06-2013
Hmm I see. What body mods did you do to get it to fit?
RE: XUD FMIC & inlet adapter - puglove - 25-06-2013
Just a tiny trim of the overlap on the leg, very minimal
RE: XUD FMIC & inlet adapter - Matt - 25-06-2013
Fair enough mate
got something that looks identical to this. Just seeing how you routed it etc
RE: XUD FMIC & inlet adapter - puglove - 05-07-2013
Budump
RE: XUD FMIC & inlet adapter - puglove - 17-07-2013
I thought this would sell fairly quick :/ obviously noy. bump again
also swaps for hdi FMIC
RE: XUD FMIC & inlet adapter - td_dan - 17-07-2013
would you sell just the intercooler mate?
RE: XUD FMIC & inlet adapter - Piggy - 17-07-2013
if dan takes intercooler and piping...I'll take the adapter
XUD FMIC & inlet adapter - td_dan - 18-07-2013
Depends on the price mate
RE: XUD FMIC & inlet adapter - puglove - 18-07-2013
well if you can work prices out between you then , I want £120 for the lot
RE: XUD FMIC & inlet adapter - Piggy - 18-07-2013
original price was 130 with the adapter and 110 without it ...so I am happy to pay £20 still
RE: XUD FMIC & inlet adapter - puglove - 18-07-2013
sorry i read that wrong i thought you wanted the piping aswell james
im not going to split unless i got a buyer for everything sorry
RE: XUD FMIC & inlet adapter - silverzx - 18-07-2013
£50 for all of it.
