306oc - Peugeot 306 Owners Club & Forum
Cost roughly for fmic kit for hdi 306? - Printable Version

+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16)
+--- Forum: DW10 HDi section (https://www.306oc.co.uk/forum/forumdisplay.php?fid=10)
+--- Thread: Cost roughly for fmic kit for hdi 306? (/showthread.php?tid=14267)

Pages: 1 2


Cost roughly for fmic kit for hdi 306? - maguire1992 - 30-05-2013

Also where to get parts ?


RE: Cost roughly for fmic kit for hdi 306? - rd070707 - 30-05-2013

there's a guide in the guides section you could have a look at mate. Considered doing mine at a point, you could head to a breakers and look for a 110 hdi 406 to get the top inlet elbow and the bottom turbo pipe is off a c5 iirc. Shouldn't be dear.

Then you will need an intercooler which are cheap enough off eBay with a piping kit. And you will also need slimline fans


RE: Cost roughly for fmic kit for hdi 306? - maguire1992 - 30-05-2013

(30-05-2013, 02:24 PM)rd070707 Wrote: there's a guide in the guides section you could have a look at mate. Considered doing mine at a point, you could head to a breakers and look for a 110 hdi 406 to get the top inlet elbow and the bottom turbo pipe is off a c5 iirc. Shouldn't be dear.

Then you will need an intercooler which are cheap enough off eBay with a piping kit. And you will also need slimline fans


Thanks for the info Smile think I will at some point after couple of other plans take place Smile


RE: Cost roughly for fmic kit for hdi 306? - Eeyore - 30-05-2013

about £350 I would have thought if youre buying things new!


RE: Cost roughly for fmic kit for hdi 306? - Just Sean - 30-05-2013

Dont need slimline fans, its up to you... i never ran them on mine


RE: Cost roughly for fmic kit for hdi 306? - Poodle - 30-05-2013

Yeah, depends whether you're happy to risk cooking your engine in traffic or not lol.

I've done mine for about £100, others have spent anything up to a grand, all depends how you do it and how much time/effort you put in. Don't forget about the clutch though, whether it'll hold or not is partially down to luck, partially down to how you drive it.


RE: Cost roughly for fmic kit for hdi 306? - Eeyore - 30-05-2013

Just have one fan! 12" or 15" are the sizes on ebay i think.


RE: Cost roughly for fmic kit for hdi 306? - Just Sean - 30-05-2013

lol!

12" and 15" are deffiantly not the same size! Smile xx


RE: Cost roughly for fmic kit for hdi 306? - Slam Wagon - 30-05-2013

About £200 in total, new cooler, and pipes, the elbows from here and you dont need fans, just open your windows and stick the heaters on full blast thats what i had to do the other week.


RE: Cost roughly for fmic kit for hdi 306? - Dum-Dum - 30-05-2013

Anywhere from £100 to £1000 as poodle says mate. If your gonna buy all new bits from ebay and peugeot then budget about £500


RE: Cost roughly for fmic kit for hdi 306? - Just Sean - 31-05-2013

I will be selling a complete fmic kit for a hdi in august Smile


RE: Cost roughly for fmic kit for hdi 306? - joelww - 31-05-2013

(31-05-2013, 03:43 AM)Just Sean Wrote: I will be selling a complete fmic kit for a hdi in august Smile

Amy idea how much ... Will be interested when u do Smile


RE: Cost roughly for fmic kit for hdi 306? - Dave26 - 31-05-2013

(30-05-2013, 09:21 PM)PE02KHG Wrote: About £200 in total, new cooler, and pipes, the elbows from here and you dont need fans, just open your windows and stick the heaters on full blast thats what i had to do the other week.

That's what I've been having to do, I have two slimline fans, clearly they aren't working!


Cost roughly for fmic kit for hdi 306? - callumcull - 01-06-2013

Cost me around £450, most expensive part was a big twinpass cooler. Didn't fit any fans, just have to make sure you don't stay still for long.

And yes, clutch. Don't go oem thinking it might hold, I made that mistake, few hundred miles later it started to slip. Should have just bought uprated from the start!


RE: Cost roughly for fmic kit for hdi 306? - maguire1992 - 03-06-2013

So your doing away with the original fans ? If you don't fit slim line ones ?


Cost roughly for fmic kit for hdi 306? - callumcull - 03-06-2013

You'll have a hell of a job fitting a cooler with oem fans. In fact, it just won't fit.

I was just being tight and didn't want to buy fans, and I've not once seen the temps go above 85c. The scanguage tells me exactly what's going in, so it's all good.


RE: Cost roughly for fmic kit for hdi 306? - Poodle - 03-06-2013

You can get a cooler in with the oem fans, but it needs to be pretty slim and the right shape, itll be a struggle to plumb in too.


RE: Cost roughly for fmic kit for hdi 306? - cwspellowe - 03-06-2013

(03-06-2013, 11:26 AM)Poodle Wrote: You can get a cooler in with the oem fans, but it needs to be pretty slim and the right shape, itll be a struggle to plumb in too.

I know mine's an XUD, but I have the factory fan behind the cooler. Just a generic eBay small FMIC


RE: Cost roughly for fmic kit for hdi 306? - Poodle - 03-06-2013

Exactamundo.


RE: Cost roughly for fmic kit for hdi 306? - Dum-Dum - 03-06-2013

The OEM fans take up a huge amount of space, you can get a sensible sized one off ebay for £20


RE: Cost roughly for fmic kit for hdi 306? - maguire1992 - 03-06-2013

Will look into this more after I have couple more plans sorted thanked for the info Smile


RE: Cost roughly for fmic kit for hdi 306? - maguire1992 - 28-09-2013

Does anyone have any pics of the bottom turbo pipe and the inlet elbow of a 110bhp engine ??


RE: Cost roughly for fmic kit for hdi 306? - Just Sean - 28-09-2013

I'm selling a complete kit for £200.

Includes clamps and everything


RE: Cost roughly for fmic kit for hdi 306? - maguire1992 - 28-09-2013

(28-09-2013, 01:28 PM)Just Sean Wrote: I'm selling a complete kit for £200.

Includes clamps and everything


How much to post to north of Ireland ?
I'll probably just build up a kit as I go along


RE: Cost roughly for fmic kit for hdi 306? - rd070707 - 28-09-2013

I got the guts of my bits for 80 quid, just need a few more silicones and thats me


RE: Cost roughly for fmic kit for hdi 306? - Just Sean - 28-09-2013

No more than £20 I'd imagine


RE: Cost roughly for fmic kit for hdi 306? - Arron - 28-09-2013

Mine added up to around 300.

Id firstly get the inlet lower pipe and 90 onto the turbo first and work from there.

And im happy I didnt scrimp with my clutch.


RE: Cost roughly for fmic kit for hdi 306? - maguire1992 - 30-09-2013

Well I've sourced a full fmic kit here for £150 all I need are the 110 pipes Smile


RE: Cost roughly for fmic kit for hdi 306? - Eeyore - 30-09-2013

I costed a full new twin pass FMIC kit with mikalor clamps and it was £360


RE: Cost roughly for fmic kit for hdi 306? - maguire1992 - 30-09-2013

This is a new kit
With clamps and all
Not sure what type of cooler it is though