![]() |
HELP! - Plug at rear of ECU - Printable Version +- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum) +-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16) +--- Forum: DW10 HDi section (https://www.306oc.co.uk/forum/forumdisplay.php?fid=10) +--- Thread: HELP! - Plug at rear of ECU (/showthread.php?tid=14182) |
HELP! - Plug at rear of ECU - Dum-Dum - 26-05-2013 Does anyone know what the wires that plug in at the rear of the ECU coming from behind the suspension strut on the 306 HDi do Wire numbers Yellow 1301, Grey 1301, Orange E282, Brown 1297, Yellow 1279A, Blue 1301 and Yellow 1279B They don't run into anything obvious, they just join the main engine loom. I don't want to have to strip the loom to work it out. RE: HELP! - Plug at rear of ECU - Chris - 26-05-2013 Yea are they on one of the round multi plugs? if so they plug into the main engine bay loom on the hdi. On the 3 plug ecus this is done away with and plugs straight into the ecu. Don't know what they control though. But it's worth popping in the whole bay loom from the hdi to replace the 2.0 on on yours and go from there. If it was a ph3 it would have been plug and play with just swapping the engine, engine loom, bay loom, fuel tank and dials. RE: HELP! - Plug at rear of ECU - cully - 27-05-2013 you sure you have the correct wire numbers? 1301 : signal sonde lambda B (-) amont catalyseur 1297 : vertical rod solenoid valve 1 control 1279 : Engine management diagnostic indicator light command 282 : right main beam supply thinking about it most of them are in the fusebox on the iner wing ![]() RE: HELP! - Plug at rear of ECU - Dum-Dum - 27-05-2013 (27-05-2013, 08:12 AM)cully Wrote: 1279 : Engine management diagnostic indicator light command Poodle has very very kindly tested this for me by unplugging his and running his car. EML comes on and goes off with the ignition fine Main beams work fine. Car starts and runs as it should Rev counter works Only thing that dosen't work as far as he can tell is the engine fans don't come on so its possibly air con and fan related. RE: HELP! - Plug at rear of ECU - Poodle - 27-05-2013 Oops, missed that post lol, ignore me. RE: HELP! - Plug at rear of ECU - Dum-Dum - 27-05-2013 Poodle repped for being awesome anyway RE: HELP! - Plug at rear of ECU - Ruan - 28-05-2013 ![]() Would appear to be around this area. That is under Automatic cooling control... RE: HELP! - Plug at rear of ECU - Poodle - 28-05-2013 Based on past experience, is getting rid of your auto-cooling a very good idea..? :p RE: HELP! - Plug at rear of ECU - Ruan - 28-05-2013 That appears to be the circuit for the Climate control... I think it must be something to do with Air con back to the ECU and bitron :/ RE: HELP! - Plug at rear of ECU - Poodle - 28-05-2013 I tested the fans by shorting the aircon plug, seems pretty conclusive lol. RE: HELP! - Plug at rear of ECU - Dum-Dum - 29-05-2013 This will be awesome if it means it's gone by getting rid of the AC then it's awesome. |