VIBE Slick A3 1300W 4Ch Amplifier £50 - Printable Version +- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum) +-- Forum: For Sale (https://www.306oc.co.uk/forum/forumdisplay.php?fid=26) +--- Forum: Parts (https://www.306oc.co.uk/forum/forumdisplay.php?fid=25) +--- Thread: VIBE Slick A3 1300W 4Ch Amplifier £50 (/showthread.php?tid=13950)

VIBE Slick A3 1300W 4Ch Amplifier £50 - silestanix - 19-05-2013 So, as I've now sold my 306 I'll not be using any of my sound system any more... Up for sale (one of many threads to come lol) is my Vibe Slick A3 Amplifier; comes complete with both end caps and chrome screws (one is black in the pictures but I have the chrome ones in amongst my 306 stuff). I build a sort of Case around it so things loose in my boot would not damage the Amp like with my previous one; this took me a good few hours to cut and build but as a result the Amp is near enough immaculate. ...also, the speaker wires and power wires are kept separate from one another to avoid interference, and the speaker wires have their own channel through the side of the case. I place some rubber grip stuff on top of the case slats so I could put things on top of it without them slipping, proved quite effective. All channels are working, I haven't really pushed the amp as it was only used with 1x 12 inch subwoofer, the specs are as follows: RMS Power @ 13.8v DC Power @ 4 Ohms 4 x 100 WRMS Power @ 2 Ohms stereo 2 x 160 WRMS Power @ 4 Ohms bridged 2 x 325 WRMS Minimum speaker impendence 2 Ohms THD Distortion 0.08% IMD Distortion 0.08% Frequency Response 20Hz - 20 Khz Input Sensitivity 200 mV - 6V Input Impendence 15K Signal to Noise Ratio 90 dB Channel Separation 50 dB Remote GAIN control 0.25 v - +6V Crossover Network Low pass filter 30 Hz – 300 Hz Bass Boost 0 dB - +24 Db High pass filter 50 Hz – 1 KHz Fuse rating 30A x 2 Size length x width x height 475mm x 245mm x 65mm Full Specs here: http://www.audiorepaircentre.com/wp-content/uploads/2009/11/slick_a3.pdf ...It has got a Lot of power to give, I kept the bass levels low down around 63Hz as I only used it for low freq background bass not thumping bass. I bought this last July for £110 from a friend of mine who got banned from driving; I'm not looking for that figure, £60 or offers around that figure are welcome for Just the Amp. If you want the wiring with it then £65 wiring consists of Earth/Ground cable, Battery Cable (more than enough for a 306), RCA Cables, remote cable, and Subwoofer speaker cable (30cm + an extra 75-80cm). There's a few on ebay, 1 which is £40 but has a blown channel. If the buyer wants the Amp without the wooden case that's fine, let me know and I'll remove it. I'd prefer collection or meeting somewhere as this is a weighty Amplifier and I don't want it ending up damaged. Tel/Text: 07930 253 948 Email: incautious@hotmail.co.uk Or, PM me - Harry. Pics Below: I hope someone snaps this up as it is a cracking amp and the low frequency bass output was class... If my Sub / Amp / Head Unit are bought together I'll knock some money off... RE: VIBE Slick A3 1300W 4Ch Amplifier £60 - HDIkyle - 23-05-2013 I have this powering speakers got it second hand about 4 years ago and its been a great amp RE: VIBE Slick A3 1300W 4Ch Amplifier £60 - silestanix - 23-05-2013 I agree Kyle, it's a good amp with a large range, it's quite good even at low volumes... Edit - gonna reduce this down to £50 now, and £70 for both This And my subwoofer...Need these gone as I need the space these are taking up in my room... RE: VIBE Slick A3 1300W 4Ch Amplifier £50 - silestanix - 24-05-2013 Price Reduced to £50 as I need this gone along with the sub. RE: VIBE Slick A3 1300W 4Ch Amplifier £50 - silestanix - 27-05-2013 SOLD...