+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16)
+--- Forum: XUD Section (https://www.306oc.co.uk/forum/forumdisplay.php?fid=11)
+--- Thread: Head gaskets (/showthread.php?tid=13945)
Head gaskets - David - 18-05-2013
Okay so I stripped the funked head today and when I took the whole fuel filter housing off the head the gasket broken, is there a proper gasket for it or not?
RE: Head gaskets - Ricky - 18-05-2013
If you buy a head set you should get a new one included
RE: Head gaskets - David - 18-05-2013
Ok thanks
RE: Head gaskets - Dave - 18-05-2013
I just used some gasket sealant, £3 a tube
RE: Head gaskets - David - 18-05-2013
And how's it holding up?
RE: Head gaskets - Dave - 18-05-2013
Was fine, still is, heads been on 3 different engines since and still fine. Clean up your surfaces well, thin layer on one of them, bolt together 80% tight, then after a day or so I always nipped them to what I normally would, so then your squashing the set rubber.