+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16)
+--- Forum: XUD Section (https://www.306oc.co.uk/forum/forumdisplay.php?fid=11)
+--- Thread: Tuning a straight diesel (nad)?? (/showthread.php?tid=13537)
Tuning a straight diesel (nad)?? - Darren123 - 04-05-2013
Can much be done to a nad 306, just to make it a bit more bearable, so slooow!!
RE: Tuning a straight diesel (nad)?? - Just Sean - 04-05-2013
Add lightness
Re: Tuning a straight diesel (nad)?? - kentiiboii - 04-05-2013
Add? Lightness?
RE: Tuning a straight diesel (nad)?? - ozonehostile - 04-05-2013
more fuel, more air, as much weight reduction as possible
RE: Tuning a straight diesel (nad)?? - Dave - 04-05-2013
govmod it, and it'll be 50x better, as long as you're not bothered about sitting at 5.5k all the time
RE: Tuning a straight diesel (nad)?? - Darren123 - 05-05-2013
Bosche pump in it, but it look different to the turbo one, not sure where the max fuel screw is!
RE: Tuning a straight diesel (nad)?? - ConorTRG - 05-05-2013
It looks different to a turbo one cause it has no boost compensater on it, the max fuel screw is at the back of the pump on top, you'll see it if you have a look at, like a bit of threaded bar sticking out with a nut on the inner end of it.
RE: Tuning a straight diesel (nad)?? - Darren123 - 05-05-2013
So basically to tune it just turn the max fuel screw? anything else that should be done?
RE: Tuning a straight diesel (nad)?? - Lolben91 - 06-05-2013
Port and polish the head? Works good on petrol NAs so should also benefit NADs?
Dont know how much a full straight through exhaust would benefit, could search about that?
Look after it, always noticed an improvement after a service!
Watch this:
http://www.youtube.com/watch?v=e5lHdZ8gF6E
RE: Tuning a straight diesel (nad)?? - Darren123 - 06-05-2013
(06-05-2013, 01:00 PM)Lolben91 Wrote: Port and polish the head? Works good on petrol NAs so should also benefit NADs?
Dont know how much a full straight through exhaust would benefit, could search about that?
Look after it, always noticed an improvement after a service!
Watch this:
http://www.youtube.com/watch?v=e5lHdZ8gF6E
hahahahah so funny
time to get the angle grinder out