306oc - Peugeot 306 Owners Club & Forum
EGT Probe Location - Printable Version

+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16)
+--- Forum: XUD Section (https://www.306oc.co.uk/forum/forumdisplay.php?fid=11)
+--- Thread: EGT Probe Location (/showthread.php?tid=13406)

EGT Probe Location - silverzx - 30-04-2013

Wheres the best place to tap into a TD04 for a EGT probe? Might get it done whilst its out of the car?

Also, it will only ever be a cheap probe so probably gonna melt anyway!

RE: EGT Probe Location - darrenjlobb - 30-04-2013

Right before the turbo or you might as well not bother, ive used cheap nasty ones before without any problems, should be fine Smile

RE: EGT Probe Location - silverzx - 30-04-2013

(30-04-2013, 08:18 PM)darrenjlobb Wrote: Right before the turbo or you might as well not bother, ive used cheap nasty ones before without any problems, should be fine Smile

So... in the exhaust manifold or? Tongue

Feel free to help suggest a cheapo one off eBay for me!

http://www.ebay.co.uk/itm/180995416661 ?

RE: EGT Probe Location - sweeney1987 - 30-04-2013

Id say easiest place would be in the exhaust manifold where egr used to be..

RE: EGT Probe Location - Ricky - 30-04-2013

(30-04-2013, 08:33 PM)sweeney1987 Wrote: Id say easiest place would be in the exhaust manifold where egr used to be..

Also one of the worst places..

RE: EGT Probe Location - darrenjlobb - 30-04-2013

The EGR is on its own passage in the exhaust, so wont see any gas flow / VERY un accurate reading!

RE: EGT Probe Location - silverzx - 30-04-2013

The one i linked any good? Goes up to 1,200*c.

RE: EGT Probe Location - Ricky - 30-04-2013

Buy my EGT gauge and probe if you want?

RE: EGT Probe Location - zx_volcane - 30-04-2013

drill and tap bottom of mani if you want, nearest turbo

ebay might be ok, but a risk if it decided to let go and your turbo eats it

I've got a stack one which is lovely and an autometer one which is also lovely (and for sale haha)

pics of my egt locating on a T25 in the collector are in this thread if that helps

http://306oc.co.uk/forum/thread-2137-page-2.html

RE: EGT Probe Location - cwspellowe - 30-04-2013

On the exhaust mani, drill and tap as close to where the runners converge as possible and get the probe pointing right in the centre of the collector...

RE: EGT Probe Location - Frosty - 30-04-2013

(30-04-2013, 09:06 PM)Ricky Wrote: Buy my EGT gauge and probe if you want?

What 1 you got ricky? Price?

RE: EGT Probe Location - silverzx - 30-04-2013

So where I've circled the red ring?

[Image: EGT.jpg]

Ideally would prefer not to touch turbo for obvious reasons (I don't want a hole in it in case I remove the EGT).

RE: EGT Probe Location - Frosty - 05-08-2013

I've put a EGT gauge on my d turbo and now need to get the probe fitted. Where is the best place to get it fitted? Like siverzx said I don't really to be drilling in to my turbo. Any help much appreciated

RE: EGT Probe Location - Mattcheese31 - 05-08-2013

come on who's got what for sale then? i'm after one too . .Big Grin

RE: EGT Probe Location - Frosty - 05-08-2013

I brought 1 off ebay