+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16)
+--- Forum: XUD Section (https://www.306oc.co.uk/forum/forumdisplay.php?fid=11)
+--- Thread: xud head on hdi block .is it possible??? (/showthread.php?tid=13330)
xud head on hdi block .is it possible??? - chippyba - 28-04-2013
hi just a fort
is it possible to fit the xud head on the hdi block
i know with some engines it is possible to swap heads n blocks about eg fords
RE: xud head on hdi block .is it possible??? - Frosty - 28-04-2013
I think this question popped up the other day and think the answer was no but im not 100% sure why
Here tis
http://306oc.co.uk/forum/thread-13152.html
RE: xud head on hdi block .is it possible??? - anto - 28-04-2013
You wont get pistons to fit was the reason why it couldnt be done without spending a prohibitive amount of money.
RE: xud head on hdi block .is it possible??? - Frosty - 28-04-2013
What would be the reason fo doing this anyway?
RE: xud head on hdi block .is it possible??? - ozonehostile - 28-04-2013
the search function on the forum needs a bigger icon. with arrows pointing to it. and flashing
RE: xud head on hdi block .is it possible??? - Tom - 28-04-2013
It would be a 2.0 instead of 1.9
RE: xud head on hdi block .is it possible??? - darrenjlobb - 29-04-2013
There would be no advantage to this what so ever, and the only way you could make it work is with custom pistons as the stock XUD IDI ones wont fit in the bores, and you cant use DI pistons in an IDI motor
Better plan is to just MTDI the 8v...did one the other day in 3 hours, including building pump / fitting.
RE: xud head on hdi block .is it possible??? - billing5 - 29-04-2013
(29-04-2013, 07:27 AM)darrenjlobb Wrote: There would be no advantage to this what so ever, and the only way you could make it work is with custom pistons as the stock XUD IDI ones wont fit in the bores, and you cant use DI pistons in an IDI motor
Better plan is to just MTDI the 8v...did one the other day in 3 hours, including building pump / fitting.
So what's involved with the pump and injectors, will it run off a stock 9mm cheers mate
RE: xud head on hdi block .is it possible??? - sweeney1987 - 29-04-2013
(29-04-2013, 07:27 AM)darrenjlobb Wrote: There would be no advantage to this what so ever, and the only way you could make it work is with custom pistons as the stock XUD IDI ones wont fit in the bores, and you cant use DI pistons in an IDI motor
Better plan is to just MTDI the 8v...did one the other day in 3 hours, including building pump / fitting.
God i wish i had your knowledge, wouldn't even know where to start doing that job with regards to timing, injectors, and fuel lines(although they're probably the easiest bit)
RE: xud head on hdi block .is it possible??? - darrenjlobb - 29-04-2013
![[Image: IMAG1164.jpg]](https://lh4.googleusercontent.com/-0UbWjqBB1Ss/UXl_1qnuSbI/AAAAAAAAG7k/jgeG8lq4R_0/w577-h433/IMAG1164.jpg)
![[Image: IMAG1170.jpg]](https://lh4.googleusercontent.com/-qY9_Kk-b0Nc/UXmgeVKZMkI/AAAAAAAAG8w/OrjQY68BT9s/w577-h433/IMAG1170.jpg)
RE: xud head on hdi block .is it possible??? - billing5 - 29-04-2013
And the pump mods
RE: xud head on hdi block .is it possible??? - Eeyore - 29-04-2013
this is a fort...
![[Image: gallerysefortbrockhurst01.jpg]](http://www.english-heritage.org.uk/content/properties/fort-brockhurst/gallery-for-fort-brockhurst/gallerysefortbrockhurst01.jpg)
this is a thought!
![[Image: depositphotos_2039304-Thought-Bubble---T...Person.jpg]](http://static3.depositphotos.com/1005979/203/i/950/depositphotos_2039304-Thought-Bubble---Thinking-Person.jpg)
RE: xud head on hdi block .is it possible??? - Mal - 29-04-2013
(29-04-2013, 09:06 AM)billing5 Wrote: So what's involved with the pump and injectors, will it run off a stock 9mm cheers mate
Break out some snacks and have a read of this, it should get you started
RE: xud head on hdi block .is it possible??? - billing5 - 30-04-2013
(29-04-2013, 11:16 PM)Mal Wrote:(29-04-2013, 09:06 AM)billing5 Wrote: So what's involved with the pump and injectors, will it run off a stock 9mm cheers mate
Break out some snacks and have a read of this, it should get you started
Thats great,,, will get my brain in gear now and have a read, me and a mate have done 11mm head, gov etc.. so have stripped a few pumps, i say few as the first pump went tits up when the gov c clip shat its self and the falling bits locked the gears and snapped the main shaft
so i hold every hope for this one lol