+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: For Sale (https://www.306oc.co.uk/forum/forumdisplay.php?fid=26)
+--- Forum: Parts (https://www.306oc.co.uk/forum/forumdisplay.php?fid=25)
+--- Thread: Harness bars (/showthread.php?tid=13255)
Pages:
1
2
Harness bars - floz123 - 27-04-2013
Hi guys. I've had a couple of requests for these now so thought it would be worth seeing if anyone else is interested.
Made 3 now and one went to the forum member 'grant' today.
I'll be selling them at £60 each with spacer/spreader plates too. For this price they will come bare metal.
For an extra £20 I can paint them the colour of your choice and for another £20 ill even fit it.
Hope this is what people are looking for on here.
Cheers Dan
RE: Harness bars - Eeyore - 27-04-2013
piiictttuuuurreessss :p
Re: Harness bars - floz123 - 27-04-2013
Oops my bad...thought there was something missing from that post lol
Last picture shows the end with spacers/spreaders supplied. Hope this is better. If you want any more info please ask
RE: Harness bars - londondan86 - 27-04-2013
What are they for?
/Noob question
Re: Harness bars - floz123 - 27-04-2013
It's for the shoulder straps on the harnesses mate. Usually people bolt them straight down to the floor which is dangerous as if you were to crash and be pulled forwards the strap would try and level out with its mounting point therefore crushing your spine :/
Safety first!
RE: Harness bars - Just Sean - 27-04-2013
where do they mount too?
Re: Harness bars - floz123 - 27-04-2013
Inner arches works fine and that's why you put the pressure spreader plates on the outside to spread the load.
IMO if the cars that rusty it isn't road worthy...lol!
And if you go anywhere else they are at least £80+.
Also just to clarify...no scaffold bars were harmed during the making of these bars. They're made from T316 steel which is roll cage material.
Oops typo...meant to put T45
RE: Harness bars - Poodle - 28-04-2013
Where are you based? Or are you able to courier them out? If so, how much is postage?
Cheers.
Re: Harness bars - floz123 - 28-04-2013
I'm based in Bagshot and Bisley. I'll have to go and get a price for postage but based on weight and size I'd say about £15? Where are you based?
Harness bars - Jonny b - 28-04-2013
My harnesses go to the upper rear seatbelt mounts, was thinking of getting a bar with threaded ends on and a bolt like in the middle like a strut brace! And they are within angle regs of harnesses
RE: Harness bars - Grant - 28-04-2013
Ive fitted mine and I must say, these a fecking pukka. Top bit of work from a top bloke. Gets my props
RE: Harness bars - swampy - 28-04-2013
(28-04-2013, 01:47 PM)Grant Wrote: Ive fitted mine and I must say, these a fecking pukka. Top bit of work from a top bloke. Gets my props
Let us know how you get on after a crash test!!!
I certainly wouldn't want my seatbelt attaching to the inner rear arches
RE: Harness bars - 7057sam - 28-04-2013
(28-04-2013, 02:11 PM)swampy Wrote:(28-04-2013, 01:47 PM)Grant Wrote: Ive fitted mine and I must say, these a fecking pukka. Top bit of work from a top bloke. Gets my props
Let us know how you get on after a crash test!!!
I certainly wouldn't want my seatbelt attaching to the inner rear arches
This only really works for people with harnesses, and have a look at the people who have fixed buckets and don't use them, I'd very much expect serious spinal injuries !
As harness s fixed to the floor in a crash with tighten and the bucket s wont move as the roof crushes down
RE: Harness bars - Niall - 28-04-2013
Cleaned up!
Guys this is a for sale thread so stop spamming the guys thread with your opinions. If you want to start a debate on where they should go, start a new thread in the correct forum!
RE: Harness bars - swampy - 28-04-2013
(28-04-2013, 07:21 PM)Niall Wrote: Cleaned up!
Guys this is a for sale thread so stop spamming the guys thread with your opinions. If you want to start a debate on where they should go, start a new thread in the correct forum!
So forum admin are condoning the sale of an item that could cause permanent injury or death when it fails as the point it is mounted too isn't strong enough??
RE: Harness bars - Niall - 28-04-2013
(28-04-2013, 07:42 PM)swampy Wrote:(28-04-2013, 07:21 PM)Niall Wrote: Cleaned up!
Guys this is a for sale thread so stop spamming the guys thread with your opinions. If you want to start a debate on where they should go, start a new thread in the correct forum!
So forum admin are condoning the sale of an item that could cause permanent injury or death when it fails as the point it is mounted too isn't strong enough??
Look thats your opinion isnt it. Everyone on here is big enough and old enough to make their own decisions so if they want to fit one, let them. He can sell pretty much anything he likes providing its legal. All we are here to do sales wise is to make sure he isnt a useless seller. Mind you we even have a few of them at the moment dont we!
Re: Harness bars - floz123 - 28-04-2013
It looks that way swampy. Maybe you could be a test dummy for me and let me know the outcome.
Cheers for the clearout Nial.
And in future ill be using larger holes for peace of mind and extra strength. My bad though...should have thought of this before hand.
If you want me to welded in Grant then let me know.
RE: Harness bars - Jonny81191 - 28-04-2013
(28-04-2013, 02:11 PM)swampy Wrote: Let us know how you get on after a crash test!!!
I certainly wouldn't want my seatbelt attaching to the inner rear arches
I think you'll find they are strong enough, it's a common enough practice.
Harness bars - td_dan - 28-04-2013
Price posted to birmingham please
RE: Harness bars - Grant - 29-04-2013
(28-04-2013, 07:51 PM)Niall Wrote: Look thats your opinion isnt it. Everyone on here is big enough and old enough to make their own decisions so if they want to fit one, let them. He can sell pretty much anything he likes providing its legal. All we are here to do sales wise is to make sure he isnt a useless seller. Mind you we even have a few of them at the moment dont we!
repped
Re: Harness bars - floz123 - 29-04-2013
Lol!!
PM sent td_dan
RE: Harness bars - Grant - 29-04-2013
Pic of this fitted for anyone interested:
![[Image: IMG_2322_zps1d9fe5e2.jpg]](http://s1117.photobucket.com/user/grant-306/media/IMG_2322_zps1d9fe5e2.jpg.html)
Re: Harness bars - floz123 - 29-04-2013
Looks good mate!
Here's one of mine if people want to see.
Re: Harness bars - floz123 - 03-05-2013
Bars are still available guys! Now with bigger holes and high tensile bolts upon request and at a slight extra cost
RE: Harness bars - declantg - 22-05-2013
I need some cash for one of these!!
Re: Harness bars - floz123 - 22-05-2013
They're still available mate. Got some made up at the moment ready to sell :-)
RE: Harness bars - declantg - 22-05-2013
Interested in a smooth boot?
Re: Harness bars - floz123 - 23-05-2013
Hmmm. What colour etc? As I do need a new bootlid
RE: Harness bars - declantg - 23-05-2013
It's in primer mate so would need spraying, also has a plate properly welded
Re: Harness bars - floz123 - 23-05-2013
Can you PM me a piccy please mate.