306oc - Peugeot 306 Owners Club & Forum
stage 2 clutch for hdi - Printable Version

+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: For Sale (https://www.306oc.co.uk/forum/forumdisplay.php?fid=26)
+--- Forum: Misc & Wanted (https://www.306oc.co.uk/forum/forumdisplay.php?fid=14)
+--- Thread: stage 2 clutch for hdi (/showthread.php?tid=12795)



stage 2 clutch for hdi - MIKE-FORD - 12-04-2013

Im in need of a stage 2 clutch for a hdi can anyone help? my standard one is slipping bad to the point the car isnt moving


RE: stage 2 clutch for hdi - lolsteve - 12-04-2013

Try the sachs kit
http://www.ebay.co.uk/itm/Sachs-Clutch-Kit-Part-No-3000950026-/111015876908?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item19d90fd92c#ht_1750wt_1399
people say it's good for stage 2 but wouldn't go any further with it


RE: stage 2 clutch for hdi - MIKE-FORD - 17-04-2013

Anyone?


RE: stage 2 clutch for hdi - Oil-burner - 17-04-2013

Is that the actual part number everyone has been raving about steve?


RE: stage 2 clutch for hdi - lolsteve - 17-04-2013

(09-03-2013, 04:04 PM)Pipps Wrote: The Sachs part number is 3000950026.

It is sometimes listed by Sachs as a Citroen Berlingo part, but it is fully compatible with a 306 HDi.

The kit cost me £154.87 from an online retailer. They even personally guaranteed it to take up 280lb/ft, and said they would provide a replacement if it began slipping within 12 months.

Here are the pics that I took of my before I fitted it:

Please feel free to rep me Wink

[Image: IMAG0158.jpg]

[Image: IMAG0162.jpg]

[Image: IMAG0161.jpg]

Hope this helps.



RE: stage 2 clutch for hdi - Oil-burner - 17-04-2013

Legend!!


Re: stage 2 clutch for hdi - kentiiboii - 17-04-2013

Hmm tempting song as a friend has 2 c5s coming soon with intercoolers which are both mine with all parts


RE: stage 2 clutch for hdi - MIKE-FORD - 17-04-2013

That Sachs clutch on there uk website is just short of £100 ATM as 30% off if that's the rite product code so looks like this could be the one then if all good


RE: stage 2 clutch for hdi - W1ll - 19-04-2013

would love some more info on clutches to take stage 2.. just spoke to sachs uk and they said that they're not sure if sachs will take stage 2 for much more than a few thousand miles..?


RE: stage 2 clutch for hdi - Arron - 19-04-2013

Sachs wont guarantee any power/torque outputs with these clutches; their just good quality oem clutches. A few folk claim sachs have guaranteed they will be good for 280lbs/ft but i doubt they would do that with an oem clutch, they couldnt even guarantee my paddle! They said it should be good for 300lbs/ft but no guarantee however i do believe this clutch can hold 280lbs/ft, for how long im not sure, which is why i went paddle

Helix do an uprated clutch for these, non paddle, its around £380 all in, when i called them they told me it was only rated to 260lbs/ft!! They do a paddle too but its quite an expensive do.

I'd definately recommend one of these kits for £100


RE: stage 2 clutch for hdi - W1ll - 19-04-2013

Just got a call back from them and they said the paddle should take a lot more, but couldn't give me a price? And I imagine that takes a bit of getting used to driving wise!


RE: stage 2 clutch for hdi - Arron - 19-04-2013

Its a bit pricey... £230 iirc. And that's just for the paddle plate. I bought the Sachs kit that's on this thread to use the release bearing and cover from.

Its not too bad, just a lil snatchy but its great for gear changes when driving like a loon. They don't take long to bed in either


RE: stage 2 clutch for hdi - W1ll - 19-04-2013

Ah okay. so you bought the above clutch (£100) and then you changed the organic plate for the paddle plate.. that straight swap? So I could use the above clutch then if it starts to slip then just get a paddle plate fitted on it?


RE: stage 2 clutch for hdi - Arron - 20-04-2013

That's right bud


RE: stage 2 clutch for hdi - Dave26 - 20-04-2013

(19-04-2013, 09:20 PM)W1ll Wrote: Ah okay. so you bought the above clutch (£100) and then you changed the organic plate for the paddle plate.. that straight swap? So I could use the above clutch then if it starts to slip then just get a paddle plate fitted on it?

Exactly what I'm doing, mine is being fitted as I type this.


RE: stage 2 clutch for hdi - W1ll - 21-04-2013

Ah okay! Cheers