+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: For Sale (https://www.306oc.co.uk/forum/forumdisplay.php?fid=26)
+--- Forum: Parts (https://www.306oc.co.uk/forum/forumdisplay.php?fid=25)
+--- Thread: Rippthrough DT Upper strut brace only 1 ever! (/showthread.php?tid=12506)
Rippthrough DT Upper strut brace only 1 ever! - Jenkosowls - 04-04-2013
Have for sale my rippthrough upper strut brace for Dt's with a xantia manifold. this is the only one in the uk and has been made to fit phase 1 bonnets but will fit other phases may also fit with the standard inlet adaptors and possibly hdis. works just as youd expect it to. This hasnt been painted so has surface rust on it now.
£65 posted
![[Image: DSCN0970.jpg]](http://i382.photobucket.com/albums/oo261/pug306lx/DSCN0970.jpg)
RE: Rippthrough DT Upper strut brace only 1 ever! - HDIkyle - 04-04-2013
Bring it to mine at weekend if you come
RE: Rippthrough DT Upper strut brace only 1 ever! - Rippthrough - 04-04-2013
And charge him £35 for delivery.
RE: Rippthrough DT Upper strut brace only 1 ever! - Jenkosowls - 04-04-2013
You wanting it Kyle?
RE: Rippthrough DT Upper strut brace only 1 ever! - HDIkyle - 05-04-2013
Ye tempted as I'd have been getting one made up anyway. Just Wana check it fits ok on a phase 1/2 cross
Rippthrough DT Upper strut brace only 1 ever! - ash240970 - 10-04-2013
Is this sold?
RE: Rippthrough DT Upper strut brace only 1 ever! - Jenkosowls - 25-04-2013
Bump!
RE: Rippthrough DT Upper strut brace only 1 ever! - Jenkosowls - 04-05-2013
Bump the only one ever made!
RE: Rippthrough DT Upper strut brace only 1 ever! - Jenkosowls - 14-05-2013
Bump offers!
RE: Rippthrough DT Upper strut brace only 1 ever! - Jenkosowls - 29-05-2013
Taking up room won fit the Berlingo!
RE: Rippthrough DT Upper strut brace only 1 ever! - Niall - 29-05-2013
did you notice a big difference fitting this? Like big difference over a OMP for example?
RE: Rippthrough DT Upper strut brace only 1 ever! - Jenkosowls - 29-05-2013
Couldn't really compare it toward an omp but it certainly compliments a lower brace. I could certainly feel a difference even with dodgy p bushes at the time. The fact that its ties the bulk head in gives it rigidity some will say its in effective as its not a straight bar linking the struts. But if this was possible it would have been done. It's certainly better tiring to the bulk head rather than bending it into thin air
RE: Rippthrough DT Upper strut brace only 1 ever! - Niall - 29-05-2013
How does it tie to the bulk head? From what i can see in the pic, you have tapped a hole and used a self tapper?
Just trying to look at it wondering if it will fit a GTi....
RE: Rippthrough DT Upper strut brace only 1 ever! - Jenkosowls - 29-05-2013
Just a flat head bolt and nut with a small hole into the bulk lip where the bonnet seal is but couldn't be sure about it fitting a 6
RE: Rippthrough DT Upper strut brace only 1 ever! - Niall - 29-05-2013
Nah looking at the photos, i dont think it will. The bar will foul the ECU
RE: Rippthrough DT Upper strut brace only 1 ever! - Jenkosowls - 03-06-2013
Up again
RE: Rippthrough DT Upper strut brace only 1 ever! - Rippthrough - 05-06-2013
(29-05-2013, 09:23 PM)Niall Wrote: Nah looking at the photos, i dont think it will. The bar will foul the ECU
Unless you do a little fettling and drop the ECU box a little lower where it mounts to the tray...
