![]() |
Grinding noise - Printable Version +- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum) +-- Forum: 306 Repairs & Mods (https://www.306oc.co.uk/forum/forumdisplay.php?fid=22) +--- Forum: Suspension, Transmission, Handling & Braking (https://www.306oc.co.uk/forum/forumdisplay.php?fid=19) +--- Thread: Grinding noise (/showthread.php?tid=12140) |
Grinding noise - Ben - 22-03-2013 I have a grinding noise coming from the front drivers side wheel area. It is audible when turning left AND accelerating, not just one or the other. Really confusing me, my first thoughts were driveshaft or wheel bearing but they both spin when turning, so surely would make the noise even when not accelerating. Or would being under load affect them? Grinding noise - Frosty - 22-03-2013 Pads ok? RE: Grinding noise - Arron - 22-03-2013 CV boot loose? Or the clip for it? Remove wheel and inspect RE: Grinding noise - sam - 22-03-2013 Wheel bearing my dt was like that and the bearing was f***ed RE: Grinding noise - ConorTRG - 22-03-2013 Wheel bearing I'd say, you'll not always get them by jacking the car up and spinning by hand, sometimes you have to put it in gear and spin it to get it to growl. RE: Grinding noise - silestanix - 22-03-2013 I'd also say wheel bearing, had the same on my old Bianca white DT & my old v70... |